607143
108
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
Troubleshooting
SQT0300
108
Troubleshooting guide
Troubleshooting
Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (> 104)
The unit is switched to standby mode
automatically.
VIERA Link has worked. (> 84, Power off link)
The remote control does not work.
The remote control and main unit are using
different codes. Change the code on the remote
control.
Software (firmware) is updating when “UPDATE
/” is displaying on the front panel display.
Wait until the update is completed. (> 104)
The HOLD function is activated. (> 106)
Startup of this unit may be slower depending on
the TV settings.
The followings do not indicate a problem
with this unit:
Regular disc rotating sounds or HDD rotating
sounds.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Image disturbance when replacing 3D discs.
Interruptions in reception due to periodic
broadcasting breaks.
When you switch the unit on or to standby
mode, there may be an unexpected sound.
General operation
The unit does not work.
Check the connections. (> 16)
One of the unit’s safety devices may have been
activated.
Reset the unit as follows:
1Press [Í/I] on the main unit to switch the unit
to standby.
If the unit does not switch to standby, press
[Í/I] on the main unit for about 3 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains
lead, wait one minute, then reconnect it.
2Press [Í/I] on the main unit to switch it on. If
the unit still cannot be operated, consult the
dealer.
Cannot eject a disc.
1 While the unit is in standby mode, press and
hold [OK], the yellow button and the blue
button at the same time for more than
5 seconds.
“00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “06 FTO” is
displayed on the front panel display.
3 Press [OK].
Front panel display
Press and hold [OK] and the indicated number
button at the same time for more than
5 seconds. (> 102)
Startup is slow.
Startup takes time in the following situations:
- A disc is inserted.
- The clock is not set.
- Immediately after a power failure or the AC
mains lead is connected.
- When a BD-J application is executing.
- When the “Quick Start” is not activated.
(> 101)
DMR-BST_BCT845_745_740EG_eng.book 108 ページ 2014年7月2日 水曜日 午後5時44分
108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-dmr-bst845

Suche zurücksetzen

  • wie kann man bei dem panasonic blue-ray recorder DMR-BST 845 die mediathek einstellen? Eingereicht am 29-4-2020 15:23

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMR-BST845 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMR-BST845

Panasonic DMR-BST845 Bedienungsanleitung - Deutsch - 128 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info