Bedienungsanleitung Panasonic DMR-EH69 (Seite 77 von 88) (Englisch)

457633

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

RQT9287

Reference

The recorded title is stretched vertically.

¾ 16:9 aspect programmes are recorded in 4:3 aspect in the

following cases.

– [-R] [-R]DL] [-RW‹V›] If you recorded or copied using “EP” or “FR

(recordings 5 hours or longer)” recording mode.

– If you recorded or copied to a +R, +R DL or +RW.

– If you recorded with the “Aspect for Recording” set to “4:3” in

the Setup menu.

When you want to record 16:9 programme in the same

aspect, set “Rec for High Speed Copy” to “On”, and set the

“Aspect for Recording” to “16:9”. (> 64)

– By setting “Aspect for Recording” to “Automatic”, there is a

chance that the recording will be made using the wrong

aspect. Match the aspect settings to the broadcast when

recording. (> 64)

It may be possible to adjust the display mode on the TV. Refer

to your television’s operating instructions.

There is a lot of after-image when playing video.

¾ Set “Playback NR” in the Picture menu to “Off”. (> 59)

When playing DVD-Video using progressive

output, one part of the picture momentarily

appears to be doubled up.

¾ Set “Progressive” in the Picture menu to “Off”. This problem is

caused by the editing method or material used on DVD-Video,

but should be corrected if you use interlace output. (> 59)

There is no apparent change in picture quality

when adjusted with the Picture menu in the on-

screen menus.

¾ The effect is less perceivable with some types of video.

The images from this unit do not appear on the

television.

Picture is distorted.

¾ Make sure that the television is connected to the AV1 terminal,

VIDEO OUT terminal, S VIDEO OUT terminal, COMPONENT

VIDEO OUT terminals or HDMI terminal on this unit. (> 8, 9,

69, 70, 71)

¾ Make sure that the television’s input setting (e.g., AV 1) is

correct.

¾ Progressive output is set to on but the connected television is

not progressive compatible. Press and hold [∫] and [1](PLAY)

on the main unit at the same time for more than 5 seconds to

cancel this setting. The setting will change to interlace.

¾ The unit’s “TV System” setting differs from the TV system used

by the disc now playing. While stopped, keep pressing [∫] and

[< OPEN/CLOSE] on the main unit for 5 or more seconds. The

system switches from PAL to NTSC or vice versa. (> 66)

¾ When this unit is connected with an HDMI cable, use a disc that

matches with this unit’s TV system.

¾ Picture may not be seen when more than 4 devices are

connected with HDMI cables.

Reduce the number of connected devices.

The picture is distorted during play, or video will

not play correctly.

¾ You may be playing a TV programme recorded with poor

reception or unfavorable weather conditions.

¾ The picture may be distorted or a black screen may appear

briefly between recorded titles in the following situations:

– between titles recorded with different recording modes.

– between scenes recorded with different aspect ratios.

– between scenes recorded with different resolutions.

– between playlist chapters.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio Output” settings.

Check the input mode on the amplifier if you have connected

one. (> 8, 9, 65, 69, 70, 71)

¾ Press [AUDIO] to select the audio. (> 32)

¾ Audio may not be output due to how files were created. (DivX)

¾ Audio may not be heard when more than 4 devices are

connected with HDMI cables.

Reduce the number of connected devices.

¾ The sound effects will not work when the bitstream signal is

output from the HDMI AV OUT terminal or the OPTICAL

DIGITAL AUDIO OUT terminal.

¾ To output audio from a device connected with an HDMI cable,

set “Digital Audio Output” to “HDMI and Optical” in the Setup

menu. (> 66)

¾ Depending on the connected equipment, the sound may be

distorted if this unit is connected with an HDMI cable.

¾ If recording to the HDD or a DVD-RAM when “Rec for High

Speed Copy” is set to “On”, you can only record either the main

or secondary audio of a bilingual broadcast.

If you do not intend to copy the title to a DVD-R, DVD-R DL,

DVD-RW (DVD-Video format), +R, +R DL or +RW set “Rec for

High Speed Copy” in the Setup menu to “Off”. (> 64)

Cannot switch audio.

¾ You cannot switch the audio in the following cases.

– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format),

+R, +R DL or +RW disc is in the disc tray while DVD drive is

selected.

– When the recording mode is XP and “Audio Mode for XP

Recording” is set to “LPCM”. (> 65)

– When “Rec for High Speed Copy” is set to “On”. (The default

setting is “On”). (> 64)

¾ The amplifier is connected using an optical digital cable or an

HDMI cable. You cannot switch the audio if “Dolby Digital” is set

to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using

audio cables. (> 65, 70)

¾ There are discs for which audio cannot be changed because of

how the disc was created.

Sound

EH59EC-RQT9287-L_eng.book 77 ページ２００８年１２月２５日　木曜日　午後４時２２分

Panasonic DMR-EH69 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMR-EH69

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info