Bedienungsanleitung Panasonic DMR-EX768EB (Seite 65 von 88) (Englisch)

502346

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

RQT9167

TV System

Change this setting if you connect an NTSC television or to

record NTSC video from another source.

1. Press [, ] to select the TV System, then

press [OK].

[PAL]

– Select when connecting to a PAL or Multi-system

television. Programmes recorded using NTSC are

played as PAL 60.

– Select to record television programmes and PAL

input from other equipment.

– [HDD] Select when playing a PAL input title recorded

on the HDD.

[NTSC]

– Select when connecting to an NTSC television.

Television programmes cannot be recorded properly.

– Select to record NTSC input from other equipment.

– [HDD] Select when playing an NTSC input title

recorded on the HDD.

The conﬁ rmation screen appears.

2. Press [] to select “Yes”, then press [OK].

Tips

To change the setting all at once (PALNTSC)

While stopped, press and hold [] and

[ OPEN/CLOSE] on the main unit simultaneously for

about 5 seconds.

HDMI Settings

1

 Press [OK] to show the following settings.

HDMI Video Format

2

You can only select items compatible with the connected

equipment. If you are concerned about output picture quality, it

may be improved by changing the setting.

– To enjoy High Quality Video up-converted to 1080p, you need

to connect the unit directly to 1080p compatible HDTV. If this

unit is connected to an HDTV through other equipment, it

must also be 1080p compatible.

[576i/480i] [576p/480p] [720p] [1080i]

[1080p] When setting video output to “1080p”, we

recommend using High Speed HDMI Cables that

have the HDMI logo (as shown on the cover).

[Automatic] Automatically selects the output resolution best

suited to the connected television (1080p, 1080i,

720p, 576p/480p or 576i/480i).

Aspect for 4:3 Video

To play a 4:3 title when connected with an HDMI cable, set

how to show pictures on a 16:9 widescreen television. 4:3

picture from HDMI output will be slightly smaller than that

from the other outputs, e.g. Scart and component, this is not a

malfunction of the unit.

[4:3] Picture output expands left or right.

[16:9] Picture is output as original aspect with side panels.

Digital Audio Output

[HDMI and Optical]

[Optical Only] Select when this unit is connected to an

ampliﬁ er with an optical digital audio cable

(¼ 70) and connected to a TV with an

HDMI cable (¼ 70) and you want to enjoy

the highest quality of audio from discs.

VIERA Link

[On]

[Off] Select when you do not want to use “HDAVI Control”.

AV2 Settings

Set to match the connected equipment.

 Press [OK] to show the following settings.

AV2 Input

Set to “RGB/Video” or “RGB” when receiving or recording

RGB output from external equipment.

[RGB/Video] The unit automatically detects whether the input

signal from the AV2 terminal is an RGB signal or

other signals and makes settings.

[RGB]

[Video]

[S Video]

Ext Link

This setting cannot be made when the “TV System” is set to

“NTSC” (¼ left)

[Ext Link 1] When this unit is connected to a satellite

receiver with a 21-pin Scart cable and this unit

receives a control signal.

Start and stop timings of recording are

controlled by the control signal.

[Ext Link 2] When external equipment with a timer function

is connected.

Recording is continued while the image signal

is being sent to the unit from the external

equipment.

Recording is stopped when the image signal is

halted by turning the external equipment off.

1

Depending on the connected equipment, some items may be

shaded in grey on the display and cannot be selected, or you

may not be able to change the settings.

2

Choose the setting to suit your TV and preference.

AV1 Output

Set according to the terminal of the connected TV.

Select “Video (with component)” or “S Video (with component)”

for component output (progressive output).

[Video (with component)]

Select when a TV is connected that can receive a composite

signal.

[S Video (with component)]

Select when a TV is connected that can receive an S Video

signal.

[RGB 1 (without component)]

Select when a TV is connected that can receive an RGB signal.

If you always would like to view the picture from the unit in RGB

signal, select this mode. The TV screen will automatically switch

to display the picture from the unit when the unit is turned on.

[RGB 2 (without component)]

Select when a TV is connected that can receive an RGB signal.

If you would like to switch to display the picture from the unit

only when playback or viewing menus, select this mode.

 If this unit is connected with an HDMI cable, you cannot select

“RGB 1 (without component)” or “RGB 2 (without component)”.

Setting Menus

DMR-EX768EB.indb 65DMR-EX768EB.indb 65 2008/03/06 10:03:162008/03/06 10:03:16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMR-EX768EB Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info