Bedienungsanleitung Panasonic DMR-HS2 (Seite 68 von 76) (Englisch)

623120

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Reference

RQT6570

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do

not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or web site

(http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (www.panasonic.ca), or an authorized

Servicentre closest to you.

Power Page

Operation

Picture

≥When progressive output is on, refer also to the section listed under “Progressive video” below.

Progressive video

No power. Insert the AC power supply cord securely into a known active AC outlet. 11

The unit switches to the

standby mode.

≥This is a power saving feature. You can turn it off if you would prefer (Set Up—Off Timer—Off).

Press [Í, DVD POWER] to turn the unit on.

≥One of the unit’s safety devices may have activated. Press [Í, DVD POWER] to turn the unit

on.

—

The unit is on but cannot be

operated.

≥Some operations may be prohibited by the disc.

≥Recording drive or playback drive have not been selected properly.

≥The unit is hot (“U14” appears on the display). Wait for “U14” to disappear.

≥One of the unit’s safety devices may have activated.

Reset the unit as follows:

1.Press [Í, DVD POWER] to switch the unit to standby.

If the unit doesn’t switch to standby, press and hold [Í, DVD POWER] for about 10 seconds.

The unit is forcibly switched to standby.

Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.

2.Press [Í, DVD POWER] to turn the unit on.

—

19, 23

—

The images from this unit do

not appear on the television.

≥Make sure that the television is connected to the AUDIO/VIDEO terminal, S-VIDEO OUT termi-

nal or COMPONENT VIDEO OUT terminal on this unit.

≥Make sure that the television’s input setting (e.g., VIDEO 1) is correct

≥When using this unit for the first time, the HDD has nothing recorded on it. You must record a

program etc. to the HDD before you can enjoy playback.

≥You have set “TV Type” to “480P” in the SETUP menus, but the television isn’t compatible with

progressive signals. Press and hold [∫] and [;] on the unit at the same time for about 5

seconds. The setting will change to interlace.

—

Television reception worsens

after connecting the unit.

≥This can occur because the signals are being divided between the unit and the television. It can

be solved by using a signal booster, available from audio-visual suppliers. Consult your dealer

if reception does not improve.

≥Due to inherent characteristics of the HDD, the picture may occasionally be disturbed. This is

normal.

—

Screen size is wrong. ≥Check the settings on your television.

≥Check the settings for “TV Aspect”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for

DVD-RAM” in the TV Screen SETUP menus.

—

16, 61

On-screen messages do not

appear.

≥Go to Display in the SETUP menus and select “Automatic” for “Status Messages”.

≥Press [STATUS] to show the on-screen messages constantly.

The blue background does

not appear.

≥Go to Display in the SETUP menus and select “On” for “Blue Background”. 61

There is ghosting. ≥Change the settings for “3D NR”, “Block NR”, and “Mosquito NR” to “0” or turn “MPEG-DNR” off

with the on-screen menus.

There is ghosting when pro-

gressive output is on.

≥Select “Video” in the on-screen menu and set “Progressive” to “OFF”. This problem is caused

by the editing method or material used on DVD, but should be corrected if you use interlace

output.

There is no apparent change

in picture quality when

adjusted with the Video menu

in the on-screen menus.

≥The effect is less perceivable with some types of video. —

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMR-HS2 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMR-HS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info