Bedienungsanleitung Panasonic DMRES10 (Seite 19 von 48) (Englisch)

523074

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT8009

Recording

You can enter up to 16 programs up to a month in advance. (Each

daily or weekly program is counted as one program.)

• When connecting a cable TV box or satellite receiver, select the

channel on the cable TV box or satellite receiver before the

scheduled recording starts.

1 Press [SCHEDULE].

2 Press [e, r] to select “New

Scheduled Recording” and press

[ENTER].

3 Press [q] to move through the items

and change the items with [e, r].

• Press and hold [e, r] to alter On (Start time) and Off (Finish

time) in 30-minute increments.

• You can also set Channel, Date, On (Start time), and Off

(Finish time) with the numbered buttons.

• You can also press [REC MODE] to change the recording

mode.

• DATE

• Title Name

Press [w, q] to select “Title Name” and press [ENTER]

(➔ page 31).

4 Press [ENTER].

Repeat steps 2–4 to schedule other recordings.

5 Press [SCHEDULE].

The message “Turn recorder off for Scheduled Recording.” is

shown on the television.

6 Press [^ DVD POWER].

The unit turns off and “z” lights on the unit’s display to

indicate scheduled recording standby has been activated.

• Even if the unit is in scheduled recording standby, you can play a

disc. Without pressing [^ DVD POWER], just press [q] (PLAY) or

[DIRECT NAVIGATOR]. Scheduled recording works even during

play.

• Even when the unit is turned off, you can display the schedule list

by pressing [SCHEDULE].

Press [SCHEDULE].

■ To change a program

Press [e, r] to select the program and press [ENTER].

(➔ left, step 3)

■ To delete a program

Press [e, r] to select the program and press [ CANCEL] or

[ADD/DLT].

■ To exit the schedule list

Press [SCHEDULE].

The message “Turn recorder off for Scheduled Recording.” is shown

on the television.

■ To put the unit on scheduled recording standby

Press [^ DVD POWER].

The unit turns off and “z” lights on the unit’s display to indicate

scheduled recording standby has been activated.

•

Programs that failed to record are displayed gray. They are

automatically deleted from the schedule list at 4 a.m. two days later.

• During scheduled recording, you can change the end time as long

as the recording mode is not “FR”.

Manually programming scheduled

recordings

■ To release the unit from recording standby

Press [^ DVD POWER].

The unit turns on and “z” goes out.

• Be sure to press [^ DVD POWER] to return the unit to standby

mode before the scheduled recording time. Scheduled recording

will work only if “z” is displayed.

■ To cancel recording when recording has

already begun

Press [g], then [ENTER] within 5 seconds.

• You can also press and hold [g] on the main unit for more than 3

seconds to stop recording.

RAM

-RW(V) +R-R

SCHEDULE

LIST

Remaining Recording Time 1:58 SP

3/26 TUE 12:53 PM

SP5:10 PM4:20 PM39 4 / 1 MON01

ModeOffOnNo Channel Date

Check

New Scheduled Recording

SCHEDULED

RECORDING

Remaining Recording Time 1:58 SP

3/26 TUE 12:53 PM

5:10 PM4:20 PM4 / 1 MON SP39

Title Name

ModeOffOnChannel Date

Date: Current date up to one month later minus

one day

Daily timer: Sun-Sat

→ Mon-Sat → Mon-Fri

Weekly timer: Weekly Sun

→ --- → Weekly Sat

SCHEDULE

LIST

Remaining Recording Time 1:58 SP

3/26 TUE 12:53 PM

ModeOffOnNo Channel Date

SP3:00 PM2:30 PM64 ABC 3/ 26 TUE02

Check

SP2:00 PM1:00 PM64 ABC 3/ 26 TUE01

New Scheduled Recording

Check to make

sure “OK” is

displayed.

RAM

Note

• “z” flashes when the unit cannot go to scheduled recording

standby (e.g., a recordable disc is not in the disc tray).

• When you program successive scheduled recordings to start

immediately one after the other, the unit cannot record the part at

the beginning of the later programs (a few seconds when

recording with DVD-RAM and approximately 30 seconds when

recording with DVD-R, DVD-RW (DVD-Video format) or +R).

• If you set DST (Daylight Saving Time) to On when manually

setting the clock (➔ page 34), scheduled recording may not work

when summer switches to winter and vice versa.

Check, change or delete a program

RAM

-RW(V) +R-R

No.

SCHEDULE

LIST

Remaining Recording Time 1:58 SP

3/26 TUE 12:53 PM

0 9

Cancel

Press ENTER to store new schedule.

ModeOffOnNo Channel Date

New Scheduled Programing

Check

Icons

This program is currently recording.

The times overlap those in another program. Recording of

the program with the later start time starts when the earlier

program finishes recording.

You stopped a weekly or daily scheduled recording. The icon

disappears the next time the scheduled program starts

recording.

The disc was full so the program failed to record.

The material was copy-protected so it was not recorded.

The program did not complete recording because the disc is

dirty or for some other reason.

Message displayed in the Check line

Displayed if the recording can fit in the remaining

space.

For recordings made daily or weekly, the display

will show until when recordings can be made (up to

a maximum of one month from the present time)

based on the time remaining on the disc.

It may not be possible to record because:

• the disc is write-protected

• there is no more space left

• the number of possible titles has reached its

maximum.

OK:

→ (Date):

! :

Panasonic DMRES10 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMRES10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info