569364
6
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
6
VQT4W64
STEP 1
Insert the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding CATV provider if you want to
watch/record encrypted digital CATV broadcasts.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
§
When using unencrypted digital terrestrial broadcasts or analogue broadcasts, you do not need to insert CAM. Proceed to STEP 2. (> below)
§
The recording might be prohibited by broadcasters.
Before connection, turn off all equipment and read the appropriate operating instructions.
Refer to “Additional connections” (> 73, 74) for connection using other terminals and connection with other equipment.
Be sure to insert the CAM horizontally into the slot.
Insert the CAM with the correct direction.
For more details, see the manual of the CAM and Smart
Card, or consult the dealer.
The Common Interface supports the modules according to
DVB Specification and CI Plus Specification.
Unplug the AC mains lead before you insert or remove the
CAM with Smart Card. Remove it slowly.
OUT
OUT
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(
PC
PC
M/
M/
BITSTREAM
BITSTREAM
)
RF
IN
RF
OUT
VIDEO
AUDIO
R
L
AV1
(
TV
)
OPTICAL
AV2
(
EXT
)
AC IN
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
AC IN
AC IN
CI (Common Interface)
slot
2
1
CAM (Conditional Access Module)
Smart Card
This unit’s rear panel
Note
STEP 2 Connection
Using a 21-pin Scart cable
You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (> 39).
You can enjoy high-quality viewing by connecting the unit to an RGB compatible television (> 86).
“AV1 Output” in the Setup menu (> 69)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off.
[approx. 0.3 W (“Power Save in Standby” is activated and “RF OUT ( Aerial Signal )” is set to “Off”.)]
Connecting a television
Required setting
OPTICAL
OUT
OUT
RF
IN
RF
OUT
VIDEO
AUDIO
R
L
AV1
(
TV
)
AV2
(
EXT
)
AC IN
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
VHF/UHF
RF IN
AV
4
3
2
1
2
AV
To the terrestrial aerial
Television’s rear panel
Aerial cable/
CATV coaxial
cable
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
Fully wired 21-pin
Scart cable
AC mains lead
(supplied)
Connect only after all other connections are
complete.
“AV2 Input” setting in the Setup menu
(> 70)
Required setting
21-pin Scart
cable
Cooling fan
Connecting a terminal other than the
21-pin Scart terminal (> 7, 74)
RF coaxial cable
(supplied)
Connect the unit directly to the
television
If you connect the unit through an AV
selector or video cassette recorder to
the television, video signal will be
affected by copyright protection systems
and the picture may not be shown
correctly.
When connecting to a television
with a built-in VCR
Connect to the input terminals on the television side if
there are both television and VCR input terminals.
Television
VCR
This unit
DO NOT
Common Interface (CI) slot
In order to view or record encrypted CATV services,
you must insert a certified CAM and Smart Card
into this slot. (> above)
Cable
Digital satellite
receivers rear panel
For viewing digital satellite broadcasts,
connect this unit with a digital satellite
receiver before connecting the AC
mains lead.
DMREX96C-VQTXXXX_eng.book 6 ページ 2013年3月5日 火曜日 午後5時51分
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-dmrex96ceg

Suche zurücksetzen

  • Mein DMR-EX96C nimmt seit einiger Zeit keinen Ton mehr auf. Alte Aufnahmen haben sauber Ton — neuere Aufnahmen bringen beim Abspielen keinen Ton mehr. Eingereicht am 18-12-2023 09:56

    Antworten Frage melden
  • Panasonic DMR EX 96C
    Ich habe o.g. Gerät. Bei der Wiedergabe von Video-Aufnahmen TV von der Festplatte - gibt es plötzlich keinen Ton mehr. Was kann ich tun? Eingereicht am 30-12-2022 11:13

    Antworten Frage melden
  • bei der Wiedergabe von Aufnahmen (Video) von der Festplatte gibt es keinen Ton mehr.
    was kann ich tun?
    Eingereicht am 30-12-2022 11:10

    Antworten Frage melden
  • wie können die Sender vom cd auf tv abgeglichen werden Eingereicht am 2-9-2019 12:00

    Antworten Frage melden
  • beim löschversuch eines aufgenommes programm erscheint auf dem Display bearbeiten nicht möglich Eingereicht am 28-6-2019 19:59

    Antworten Frage melden
  • Wie kann ich an den Recorder Kopfhörer anschalten? Eingereicht am 28-11-2018 18:14

    Antworten Frage melden
  • hat der DVD recorder eine Möglichkeit um eine Festplatte anzuschließen Eingereicht am 26-10-2018 17:26

    Antworten Frage melden
  • Wie mache ich einen sendersuchlauf beim panasonic dvd recorder dmr ex96c Eingereicht am 15-10-2017 16:17

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMREX96CEG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMREX96CEG

Panasonic DMREX96CEG Bedienungsanleitung - Deutsch - 88 seiten

Panasonic DMREX96CEG Bedienungsanleitung - Französisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info