569364
70
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
70
VQT4W64
Changing the unit’s settings
§
Can be selected when selecting Digital Terrestrial (DVB-T)
Channels in Auto Setup
(All factory default settings are indicated with underlined text.)
AV2 Settings
Set to match the connected equipment.
Press [OK] to show the following settings.
AV2 Input
Set to “S Video” when receiving or recording S Video output from
external equipment.
[Video
] [S Video]
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (> 69).
[Ext Link 1] When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin
Scart cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2
] When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
Active Antenna
§
[On] Select this when you will use indoor antenna that is not
equipped with power supply.
[Off
]
Common Interface
Access to software contained on Common Interface (CI) modules.
(> 6, 10) Follow the on-screen instructions.
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
[DVD 1
] [DVD 2] [DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1
Press [
3
,
4
] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)
and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote
control to match the main unit’s
(> step 2).
Executing “Shipping Condition” in the Setup menu returns the main
unit code to “DVD 1”. Change the remote control code to 1
(> step 2).
Setup
Tuning
Remote Control
Press “” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Note
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly, use the settings listed
in the method below.
1
Press [
3, 4]
to select “Off” of “Automatic” and press [OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
Standby Settings
Press [OK] to show the following settings.
Power Save in Standby
[On] It will go into “Power Save in Standby” mode
when the unit is in standby mode.
[Off] It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer] “Power Save in Standby” is set to activate
during the setting time period. (> below)
1 Press [3, 4] to select “On Timer” and press [OK].
2 Press [3, 4] to set the start time (hour).
3 Press [2, 1] to select the stop time and press [3, 4] to
set the stop time (hour).
4 Press [OK] when you have finished the settings.
You can also use the numbered buttons for setting.
You can set start and stop time by the hour.
If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Clock
Automatic
Time Date
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
SELECT
CHANGE
Off
0
:
00 :
00
1
. 1
.
2010
0 9
Number
e.g., This screen appears
while receiving a digital
broadcast.
Note
Power Save in Standby
Power Save On Timer
To
6
:00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
DMREX96C-VQTXXXX_eng.book 70 ページ 2013年3月5日 火曜日 午後5時51分
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-dmrex96ceg

Suche zurücksetzen

  • Mein DMR-EX96C nimmt seit einiger Zeit keinen Ton mehr auf. Alte Aufnahmen haben sauber Ton — neuere Aufnahmen bringen beim Abspielen keinen Ton mehr. Eingereicht am 18-12-2023 09:56

    Antworten Frage melden
  • Panasonic DMR EX 96C
    Ich habe o.g. Gerät. Bei der Wiedergabe von Video-Aufnahmen TV von der Festplatte - gibt es plötzlich keinen Ton mehr. Was kann ich tun? Eingereicht am 30-12-2022 11:13

    Antworten Frage melden
  • bei der Wiedergabe von Aufnahmen (Video) von der Festplatte gibt es keinen Ton mehr.
    was kann ich tun?
    Eingereicht am 30-12-2022 11:10

    Antworten Frage melden
  • wie können die Sender vom cd auf tv abgeglichen werden Eingereicht am 2-9-2019 12:00

    Antworten Frage melden
  • beim löschversuch eines aufgenommes programm erscheint auf dem Display bearbeiten nicht möglich Eingereicht am 28-6-2019 19:59

    Antworten Frage melden
  • Wie kann ich an den Recorder Kopfhörer anschalten? Eingereicht am 28-11-2018 18:14

    Antworten Frage melden
  • hat der DVD recorder eine Möglichkeit um eine Festplatte anzuschließen Eingereicht am 26-10-2018 17:26

    Antworten Frage melden
  • Wie mache ich einen sendersuchlauf beim panasonic dvd recorder dmr ex96c Eingereicht am 15-10-2017 16:17

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMREX96CEG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMREX96CEG

Panasonic DMREX96CEG Bedienungsanleitung - Deutsch - 88 seiten

Panasonic DMREX96CEG Bedienungsanleitung - Französisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info