Bedienungsanleitung Panasonic DP-UB154 (Seite 24 von 38) (Englisch)

734632

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

- 24 -

Reference



HDR10+ Setting

You can set enable/disable of the HDR10+

function.

By changing this setting to “On”, you can use the

HDR10+ function under the following conditions:

– A device (TV, etc.) that supports HDR10+ is

connected (



10).

– A disc that supports HDR10+ is played back.

The “Picture Settings” setting is disabled while

using the HDR10+ function. (



22)



Advanced Settings

Press [OK] to show the following settings:



Colour Mode

This setting is for selecting colour-space

conversion of the image signal.



Deep Colour Output

Set the output method to be used when this unit

is connected to a TV that supports Deep Colour.



HDR/Colour Gamut Output

Set the output type for HDR (High Dynamic

Range) material.



Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

*1 It displays images at the highest resolution available on

your TV.

*2 A high resolution image/display technology of

approximately 4000 (width) x 2000 (height) pixels.

*3 A progressive image recorded at a rate of 24 frames

per second (motion-picture lm). Many BD-Video movie

contents are recorded in 24 frames/second in accordance

with the lm materials.

Sound



Dynamic Range Compression

You can listen at low volumes but still hear

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

“Automatic” is effective only when playing Dolby

TrueHD.



Digital Audio Output

Press [OK] to show the following settings:



Dolby Audio



DTS/DTS-HD



DSD Output Mode

Select the audio signal to output.

Select “PCM”, when the connected equipment

cannot decode the respective audio format.

This unit decodes the audio format and

transmits to the connected equipment.

If you do not make proper settings the audio

may be static or noisy.

“DSD Output Mode” is effective only when

connecting the unit with an HDMI cable.

When playing DSD 11.2 MHz format le

regardless of the settings for “DSD Output

Mode”, PCM signals are output from HDMI

terminal and

UB450

UB159

COAXIAL

terminal.



BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.

UB450

UB159



HDMI Audio Output

This setting selects whether or not to output

audio from HDMI.

To enjoy audio with the HDMI terminal, select

“On”. To enjoy audio with the COAXIAL

terminal, select “Off”. Audio will not be output

from the HDMI terminal regardless of the

settings for “HDMI(VIDEO) Output Mode”.



To enjoy BD-Video that supports Dolby Atmos

DTS:X

Connect this unit to an AV amplier or similar device that

supports it with an HDMI cable, and select the following

settings:

– Dolby Audio: “Bitstream”

– DTS/DTS-HD: “Bitstream”

– BD-Video Secondary Audio: “Off”

Dolby Atmos is a trademark of Dolby Laboratories.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DP-UB154 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DP-UB154

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info