Bedienungsanleitung Panasonic DP-UB391 (Seite 35 von 44) (Englisch)

734637

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 35 -

Reference

You have forgotten your ratings password.

You want to cancel the ratings level.

h The ratings level returns to the factory

defaults.

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET”

is displayed on the screen.

2 Press [1] (right) repeatedly on the remote

control until “03 VL” is displayed on the

screen.

3 Press [OK].

The TV screen turns black.

h In the following cases, HDMI authentication

takes place and a black screen is displayed:

– When “24p Output” is set to “Automatic”.

– When the display is switched between 2D

and 3D images.

– When you quit the 4K playback by

displaying another screen, including the

HOME menu.

– When “HDMI Output Settings of Music

Playback” is set to “Sound Quality Priority”.

This unit does not recognize the USB

connection correctly.

h Disconnect and re-connect the USB cable. If

it still does not recognize the connection, turn

this unit off and on again.

h USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

– a USB extension cable

h If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

h If the USB HDD is not recognized, the power

to the USB HDD may not be supplied. Supply

power from an external source.

Images from this unit do not appear on the TV

screen, or they are distorted.

h An incorrect resolution is selected in “Video

Format”. Reset the setting as follows:

h The connected devices are changed. Reset

the setting as follows:

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash.

2 Press [8] and the blue button on the remote

control at the same time for more than

5 seconds.

Set the item again. (> 28)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD

audio are not output properly,

select “Yes” in “Default Settings” (> 33) and

make proper settings.

– “4K(50p/60p) Output” will be set to “Off”.

Make the correct setting again. (> 28)

h PAL discs cannot be correctly viewed on an

NTSC TV.

h When “3D BD-Video Playback” in the Setup

menu is set to “Automatic”, images may not

be output depending on the connection

method. After removing the disc from this unit,

select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 31)

h When outputting in 4K, images may be

distorted depending on the HDMI cable. Use

an HDMI cable that supports 18 Gbps.

Video is not output.

h Video is not output when the “High Clarity

Sound” is set to “On (Video Off)”. (> 27)

h Video from the HDMI AUDIO OUT terminal is

not output when the “HDMI(AUDIO) Output

Mode” is set to “Audio Only”. (> 28)

Picture

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DP-UB391 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info