Bedienungsanleitung Panasonic DP-UB9000 (Seite 31 von 48) (Englisch)

734628

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

- 31 -

Reference

∫ HDR10+ Setting

You can set enable/disable of the HDR10+

function.

By changing this setting to “On”, you can use the

HDR10+ function under the following conditions:

– A device (TV, etc.) that supports HDR10+ is

connected (> 10).

– A disc that supports HDR10+ is played back.

≥ The “Optimum HDR Adjustment” setting is

disabled while using the HDR10+ function.

(> 28)

∫ Advanced Settings

Press [OK] to show the following settings:

h Colour Mode

This setting is for selecting colour-space

conversion of the image signal.

h Deep Colour Output

Set the output method to be used when this unit

is connected to a TV that supports Deep

Colour.

h HDR/Colour Gamut Output

Set the output type for HDR (High Dynamic

Range) material.

h SDR/HDR Conv. (Network Service)

When Network Service content is played back,

this converts SDR (Standard Dynamic Range)

content to HDR signals to minimise the screen

distortion that occurs when the displayed

content changes. (Available for some Network

Service contents only)

h HLG / PQ Conversion

Set whether or not to convert HDR (High

Dynamic Range) videos in HLG format to PQ

format before outputting them when this unit is

connected to a TV that supports only HDR (PQ)

format.

≥ When “HDR/Colour Gamut Output” is set to

other than “HDR/BT.2020 (Auto)”, this setting

is disabled.

h HDR Display Type

Set the type of the connected HDR-compatible

display. The operation of “HDR Optimiser” in the

“Picture Settings” is optimised based on this

setting. (> 28)

h HDCP Output Setting

If you connect to a TV that does not support

HDCP2.2 via an amplifier or speaker, some

images may be displayed as black screens. In

that case, select “HDCP1.4 Limit”.

h Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

h Audio Output

This setting selects whether or not to output

audio from HDMI.

≥ To enjoy audio with the HDMI terminal, select

“On”. To enjoy audio with the OPTICAL/

COAXIAL/2ch AUDIO OUT terminal, select

“Off”. Audio will not be output from the HDMI

terminal regardless of the settings for

“HDMI(VIDEO) Output Mode” and

“HDMI(AUDIO) Output Mode”.

h 7.1ch Audio Reformatting

Surround sound with 6.1ch or less is

automatically expanded and played back at

7.1ch.

≥ If “Off” is selected, sound is played over the

original number of channels. (Note that in the

case of 6.1ch audio, playback will be at

5.1ch.)

≥ Audio reformatting is enabled in the following

cases:

– When you have selected “PCM” in “Digital

Audio Output”.

– When the audio is Dolby Digital, Dolby

Digital Plus, Dolby TrueHD or LPCM.

– BD-Video playback

It displays images at the highest resolution available on

your TV.

A high resolution image/display technology of

approximately 4000 (width) k 2000 (height) pixels.

A progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie

contents are recorded in 24 frames/second in accordance

with the film materials.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DP-UB9000 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DP-UB9000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info