Bedienungsanleitung Panasonic dvd rv60eg s (Seite 39 von 44) (Englisch)

138315

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

VQT8626

Home Theater

ENTER

Speaker Setting

1 Multi-channel

2-channel

Press RETURN to exit

1 Disc Languages

Level 8

2 Ratings

3 Menu Language

4 On-Screen Messages

5 FL Display

6 TV Aspect

7 Digital Audio Output

8 Speaker Setting

Press RETURN to exit

9 Other Settings

English

Bright

4:3

2-channel

SETUP

ENTER

Press RETURN to exit

Speaker Setting

Exit

Test

LS RS

TOP MENU

DISPLAY

PLAY MODE SUBTITLE

AUDIO ANGLE

ENTER

RETURN

1 2 3

A-B REPEAT

4 5 6

7 8 9

SETUP CANCEL

REPEAT MODE

V.S.S.

2·3·4·5

RETURN

L R

Home theater

Speaker Setting

Here you can change the settings for the built-in decoder.

In general, these changes have no effect if you connect the player to

other equipment through the digital audio output terminal (make the

necessary changes on the other equipment). Multi-channel MPEG 2

audio is an exception (➡ below).

Common procedure

1 Press [SETUP] in the stop mode.

The initial settings screen is displayed.

2 Press the cursor buttons [3, 4] to se-

lect “8 Speaker Setting” and press

[ENTER].

3 Press the cursor buttons [3, 4] to se-

lect the item and press [ENTER].

1 Multi-channel

If you have connected three or more speakers. (Proceed to

step 4)

2 2-channel (Factory preset)

If you have connected 2 speakers. (You will return to the

menu shown in step 1. Settings are not necessary.)

4 Change settings to suit your speakers

and the listening position

(➡ page 40).

≥Setting the size and presence of your speakers

Choose “Yes” for speakers you have connected. Sound will

not be output if you choose “No”.

≥Delay time

Allows you to make up for differences in distance if you

cannot place your speakers in the optimum position. (Dolby

Digital DVD only)

≥Channel balance

Allows you to adjust the output level of the speakers to make

up for differences in volume caused by different types of

speaker or distance.

5 Press the cursor buttons [3, 4,

2 2

1] to select “Exit” and press [EN-

TER].

The screen illustrated in step 2 is displayed.

To cancel during setup operation

Press [RETURN]. (The previous screen is displayed.)

To exit the initial settings screen

Press [SETUP] or [RETURN] .

When playing multi-channel MPEG 2 audio

To enjoy the multiple channels on this kind of software, do the

following.

≥Connect the player to an amplifier with the 5.1-channel audio input

terminals (➡ page 34) and select “1 Multi-channel” in step 3.

≥Connect to an amplifier that can decode MPEG 2 through the digital

audio output terminal and in “7 Digital Audio Output”, select “2

Bitstream” for “4 MPEG” (➡ page 37).

If any other kind of connection is used, including headphones, be

sure to select “2 2-channel” in step 3.

(Continued on next page)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic dvd rv60eg s Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info