Bedienungsanleitung Panasonic dvd s52 (Seite 24 von 28) (Englisch)

137176

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT8519

Troubleshooting guide

Picture incorrect

Progressive video

Sound incorrect

Picture distorted. ≥Ensure that the unit is not connected through a video cassette

recorder. (6)

≥ Have you selected an item in “Video Output Mode”

(

➜

page

18, Picture Menu)

that is incompatible with the connected

equipment? Depending on the current connection status,

perform corresponding steps.

―When connecting to a television that is incompatible with

progressive output using the COMPONENT VIDEO OUT

terminal:

Press and hold [CANCEL] until the picture displays

correctly. The settings will return to “480i” or “576i”.

―When connecting to a television with an HDMI cable:

Press and hold [CANCEL] until the picture displays

correctly. The settings will return to “480p” or “576p”.

―When connecting to an amplifier with an HDMI cable, and

to a television that is incompatible with progressive output

using the COMPONENT VIDEO OUT terminal:

1.Disconnect the HDMI (remove the cable/switch off the

amplifier).

2.Press and hold [CANCEL] until the picture displays

correctly. The settings will return to “480i” or “576i”.

3.Set “Video Output” to “Off” in the “HDMI” tab. (21)

Connect the HDMI (connect the cable/switch on the amplifier).

≥ [DivX] Change “Source Select” in Picture Menu. (18)

Picture size

doesn’t fit the

screen.

≥ Change “TV Aspect” in “Video” tab. (20)

≥

se the television to change the aspect. If your television does not

have that function, change “4:3 Aspect” in Display Menu.

(19)

≥ Change the Zoom setting. (13)

Picture stops. ≥Picture may stop if the DivX files are greater than 2GB.

When playing PAL

disc, picture

distorted.

≥ Set “Transfer Mode” in Picture Menu to “Auto”. (18)

The television

may display

incorrectly or

colours appear

faded.

≥ The unit and television are using different video systems.

[Asia] Use a multi-system or NTSC television.

[Others]

Use a multi-system or PAL television.

≥ The system used on the disc doesn’t match your television.

–

PAL discs cannot be correctly viewed on an NTSC television.

–This unit can convert NTSC signals to PAL 60 for viewing on

a PAL television (“NTSC Disc Output” in “Video” tab). (20)

≥Connect to a progressive output compatible television to enjoy

progressive video.

≥

Picture may not be seen when more than 4 devices are connected

with HDMI cables. Reduce the number of connected devices.

Menu not displayed

correctly.

≥ Restore the zoom ratio to a1.00. (13)

≥ Set “Subtitle Position” in Display Menu to “0”. (19)

≥ Set “4:3 Aspect” in Display Menu to “Normal”. (19)

Auto zoom

function does not

work well.

≥ Turn off TV’s zoom function.

≥ Use the other preset aspect ratios or manual adjustment. (13)

≥ Zoom function may not work well, especially in dark scenes

and may not work depending on the type of disc.

Video is not

output from HDMI

AV OUT.

≥ Change the HDMI video output settings by using either of

the procedures below.

–

Connect the television using VIDEO OUT or S VIDEO OUT

terminal, then set “Video Output” to “On” in the “HDMI” tab.

(21)

– Press and hold [CANCEL] until the picture is displayed.

The settings will change to “On”.

RGB video is not

output from the

SCART terminal.

≥ When connecting to an amplifier with an HDMI cable, set

“Video Output” in the “

HDMI

” tab to “Off”. (21)

There is ghosting

when progressive

output is on.

≥ This problem is caused by the editing method or material

used on DVD-Video, but should be corrected if you use

interlace output. Change “Video Output Mode” in Picture

Menu to “480i” or “576i”. (18)

When connecting with HDMI AV OUT terminal, connect with the

other terminals and change the settings in the following order:

1. Select “Video Output”(“HDMI” tab) to “Off”. (21)

Select “Video Output Mode”(Picture Menu) to “480i”or “576i”.

(18)

Pictures not in

progressive output.

≥

If the unit is connected to the television through VIDEO OUT,

S VIDEO OUT or SCART terminal, output will be interlace.

Sound distorted. ≥Select “Off” in “Advanced Surround”. (12)

≥ Set “Attenuator” in Audio Menu to “On” if it causes distortion

with 2ch or 5.1ch AUDIO OUT terminals. (19)

≥ Noise may occur when playing WMA files.

≥[DVD-A] The disc may have restrictions on the method of

audio output. With some multi-channel discs, unless the

number of connected speakers is the same as the disc’s

channel specification, audio will not be output properly. Refer

to the disc’s jacket for more information.

≥With HDMI AV OUT connections, audio may not be output

from other terminals in the way that was set.

≥

Match the speaker settings with the connected equipment.

(21)

Piercing noise

comes from the

speakers.

≥ If you have connected a digital amplifier which does not

include decoder, be sure to select “PCM” in “Dolby Digital”,

“DTS Digital Surround” or

“MPEG”

§1

in “Audio” tab. (21)

Effects do not

work.

≥ None of the audio effects work when the unit is outputting

bitstream signals from the COAXIAL, OPTICAL or HDMI AV

OUT terminal. (7, 8)

≥

Some audio effects do not work or have less effect with some discs.

≥Night Sound Mode, H.Bass, Advanced Surround, Multi Re-

master and Sound Enhancement do not work if you have

changed the play speed.

≥

With HDMI AV OUT connections, HDCD discs are played as normal CDs.

No sound ≥

There may be a pause in sound when you change the play speed.

≥

Audio may not be heard when more than 4 devices are connected

with HDMI cables. Reduce the number of connected devices.

≥[DivX]

Audio may not be output due to how files were created.

(5)

Troubleshooting guide

RQT8519-1B.fm Page 24 Tuesday, April 25, 2006 9:16 AM

Panasonic dvd s52 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic dvd s52

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info