Bedienungsanleitung Panasonic dvds 75 (Seite 9 von 13) (Englisch)

136816

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

RQT6627

Advanced operations

Using Graphical User Interface (GUI) screens

Play Menu

Display Menu

Unit information

A-B repeat [RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

(When the elapsed play time is displayed)

Repeat a section between points A and B within an item.

[ENTER] (start point) ➜ [ENTER] (finish point)

To cancel: [ENTER]

≥Subtitles recorded around A and B may fail to appear.

≥The end of an item becomes point B when it is reached.

≥A-B repeat is canceled when you press [QUICK REPLAY].

Repeat mode

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

(When the elapsed play time is displayed)

[JPEG]

[RAM]

PG: Program

A: All

S: Scene

§1

PL: Playlist

§1

OFF: Off

[DVD-A] [WMA] [MP3]

T: Track

G: Group

A: All

§2

OFF: Off

[DVD-V]

C: Chapter

T: Title

A: All

§2

OFF: Off

[VCD] [CD]

T: Track

A: All

OFF: Off

[JPEG]

G: Group

OFF: Off

§1

During play list play.

§2

During all group, program and random play.

If the Video CD has playback control

1. Press [∫] to clear “PBC” from the display.

2. Press the numbered buttons to select a track to start play.

3. Select an item to repeat.

To repeat only your favorite tracks/chapters

[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

Start program play (➜ page 14) and display “A”.

Play mode display [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]

---: Normal play PGM: Program play

RND: Random play ALL: All group play ([DVD-A])

Marker

[RAM] : 999 positions

[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] :5 positions

[ENTER] (The unit is now ready to accept markers.)

To mark a position: [ENTER] (at the desired point)

To mark another position:[2, 1] ➜ [ENTER]

To recall a marker: [2, 1] ➜ [ENTER]

To erase a marker: [2, 1] ➜ [CANCEL]

[RAM]

To mark the eleventh point and beyond

1. Press [2, 1] to select the marker pin icon.

2. Press [3, 4] to select “11–20”.

≥You can select the next group when the

current group is full.

3. Press [1].

≥The markers are ordered by time. This

means that the marker numbers can change when you add

and erase markers.

≥If places have been marked (e.g., with a DVD video

recorder), they are displayed.

≥You can clear existing markers, but they are restored when

you open the disc tray or switch the unit to standby.

≥This feature doesn’t work while using a play list.

[Note]

≥This feature doesn’t work during program and random play.

≥Markers you add clear when you open the disc tray or

switch the unit to standby.

1–10

4:3 Aspect

Select how to show images made for 4:3 aspect screens on

a 16:9 aspect television.

Normal: Laterally stretches images made for a 4:3 screen.

Auto: Expands suitable 4:3 letterbox images to fill more of

the screen. Other images appear in full in the

center of the screen.

Shrink: Images appear in the center of the screen.

Zoom: Expands all images to fill the screen.

If your television has a similar feature, use it instead for a

better effect.

Zoom (➜ page 13)

To select preset aspect ratio

Press [ENTER] and then [2, 1] to select. Press [ENTER] to

finish.

Subtitle Position/Subtitle Brightness (➜ page 12)

Bitrate Display on/off

[RAM] [DVD-A] (Moving picture part) [DVD-V] [VCD]

When you select “ON”:

During play: Shows the average bitrate (approximate

values) of the video being played

While paused:Shows the data volume of the frame and type

of picture (➜ page 21, Glossary—I/P/B)

While the display is on, press [2, 1] to change the display:

e [2, 1]

OSD Brightness (j3 to i3)

Adjust the brightness of the on-screen displays.

9.438 Mbps

Bitrate

Cur. 7.507 Mbps

Ave. 6.730 Mbps

5.0

Mbps

A record of bitrates for a

sampling period

Current bitrate

Average bitrate

RQT6627

Advanced operations

Audio Menu

Picture Menu

∫ User mode

Press [1] while “U1”, “U2” or “U3” is highlighted and then press [3, 4] to

select “1”, “2” or “3”.

U1: MPEG D.N.R. (Digital Noise Reduction)

U2: Picture Control

U3: Video output mode➜left

Indicates how far you have played through an item.

Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]

Press [3, 4] to show the elapsed play time or remaining time for the

program, play list, track or title (or chapter during program and random

play).

Elapsed play time [VCD] (SVCD only) [WMA] [MP3]

For display only, cannot be changed.

∫ Changing play speed [DVD-A] (Moving picture part) [DVD-V]

(Dolby Digital only)

You can slow down or speed up play.

Press [2] (slower) or [1] (faster).

There are five speeds:

a0.8 ,. a0.9 ,. a1.0 (normal speed) ,. a1.2 ,. a1.4

≥After you change the speed:

jOutput is in stereo,

jAdvanced Surround does not work,

jDigital output switches to PCM.

≥Sound is stereo as long as “a1.0” is orange.

To return to normal play

Press [1] (PLAY).

Unit information

Advanced Surround (➜ page 13)

Double Re-master (➜ page 13)

Dialogue Enhancer

[DVD-V] (Dolby Digital, DTS, 3-channel or over only, where the

dialogue is recorded in the center channel)

This makes the dialogue in movies

easier to hear.

ON()OFF (Factory preset)

≥This does not work or has less

effect with some discs.

Attenuator (For analog connection)

Switch on if sound is distorted.

ON()OFF (Factory preset)

Picture mode

N: Normal mode

S: Soft mode (Soft picture with fewer video artifacts)

F: Fine mode (Details are sharper)

C1 (Cinema1): Mellows images and enhances

detail in dark scenes

C2 (Cinema2): Sharpens images and

enhances detail in dark scenes

U1/U2/U3: User mode (➜ right)

Video output mode

480I: Interlace video

480P: Progressive video

(¢: Progressive output not possible with PAL signals)

≥You can change the video output mode only when

–“Progressive Out (Component)” is set to “Enable (NTSC

Disc Only)” and

– [For\the\United\Kingdom\and\Continental\Europe]

“Video Out (AV/Component)” is set to “Y PB PR”

in the SETUP menu (➜ page 18).

Transfer mode

Select the method of conversion for progressive output to

suit the type of material being played (➜ page 21,

Glossary—Film and video).

Auto 1 (normal): For viewing film material

Auto 2: For viewing film material (the same as Auto 1, but

able to convert 30-frame-per-second progressive

video)

Video: For video material

DVD

MPEGMPEG

PGMPGM

A B C D

SLEEPSLEEP

RNDRND A B

JPEGJPEG

ZOOMZOOM PG SD

AVAAV MPMP

CDCD WMWM

DVD

MPEGMPEG

PGMPGM

A B CDD

SLEEP

RNDRND A B

JPEGJPEG

ZOOM PG SD

AV AV MP

CDCD WM

Depth Enhancer (➜ page 13)

3D-NR (0 to i4)/Dot NR (On)

Reduces overall noise/Reduces the dot noise that occurs at

the borders between colors.

Block NR (0 to i3)

Smoothes block noise.

Mosquito NR (0 to i3)

Reduces the smudging that appears around contrasting

sections of the picture.

Contrast (j7 to i7)

Adjusts the contrast between light and dark parts of the

picture.

Brightness (0 to i15)

Adjusts the picture brightness.

Sharpness (j7 to i7)

Adjusts the sharpness of the edges of the horizontal lines.

Colour (j7 to i7)

Adjusts the shade of the picture’s color.

Gamma (0 to i5)

Adjusts the brightness of dark parts of the picture.

Progress indicator

e.g. [DVD-V]

Current position

Condition – play, pause, or slow/search

Panasonic dvds 75 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic dvds 75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info