Storing the device
1. Fold the end of the pressure cuff in
the direction of the arrow.
2. Unfold the 2 cm gauge so that it is
straight in order to make it easy to
store the device in the case.
3. Next, fold the pressure cuff in on
itself and secure it on loop fastener.
• Place the device in the storage case.
Care and maintenance
GB
39
Saving and recalling data (cont.)
38
Deleting all data stored in the memory
(1) Use the Memory/Recall button to access saved data.
(2) Press the Memory/Recall button again and hold it down for more
than three seconds to delete all data.
* It is not possible to delete individual readings.
(3) When all data has been deleted the mark and will be
displayed.
Recalling readings from memory
Readings can be recalled after being saved without having
to switch the device on.
1. Press the Memory/Recall button.
• The average readings of all recorded measurements
are displayed.
• The mark will be displayed.
• When, for example, readings from 90 measurements
have been saved the average of the readings from 90
measurements will be displayed.
• If there is only 1 measurement recorded, mark will
not be displayed.
2. Press the Memory/Recall button to display readings
starting with from the most recent measurement.
• Each time the Memory/Recall button is pressed
readings are displayed in order of the most recent
measurement.
• No readings will be displayed when there are none in
the memory.
• After approxmately 1 second, date and time of
measurement will be displayed.
3. Press the On/Off and Start button to switch off the
device.
If you forget to switch off the device it will do so
automatically after approx. 30 seconds.
(After approx.
one second.)
EW3036EU_25-45 05.2.17 7:55 PM ページ 38
