Bedienungsanleitung Panasonic EY7201 (Seite 4 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

502409

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

– 6 – – 7 –

LED light How to use the belt hook

CAUTION:

To eliminate excessive temperature

increase of the tool surface, do not oper-

ate the tool continuously (using two or

more battery packs consecutively.) Tool

needs cool off time before switching to

another pack.

CAUTION:

To prevent damage, do not operate

Forward/Reverse lever until the bit

comes to a complete stop.

1. Set the belt hook at storing position.

2. Loosen the screw turning it counter-

clock-wise, using a coin or a flat blade

screw driver.

3. Take out the belt hook and insert into

the other side of the slot on the main

unit.

4. Fasten the screw firmly, turning it clock-

wise.

The belt hook can be taken out from the

main unit only when it is at storing position.

To change the belt hook

location side

The belt hook can be attached to either

side of the unit.

Switch and Forward/Reverse

lever Operation

Forward Rotation Switch

Operation

1. Push the lever for forward rotation.

2. Depress the trigger switch slightly to

start the tool slowly.

3. The speed increases with the amount

of depression of the trigger for efficient

tightening of screws. The brake oper-

ates and the bit stops immediately

when the trigger is released.

4. After use, set the lever to its center po-

sition (switch lock).

Reverse Rotation Switch

Operation

1. Push the lever for reverse rotation. Check

the direction of rotation before use.

2. Depress the trigger switch slightly to

start the tool slowly.

3. After use, set the lever to its center po-

sition (switch lock).

CAUTION:

The built-in LED light is designed to illu-

minate the small work area temporarily.

Do not use it as a substitute for a regular

flashlight, since it does not have enough

brightness.

Depress the trigger switch, then LED light

turns on. When the trigger switch is

released, the light turns off automatically.

The light illuminates with very low current,

and it does not adversely affect the perfor-

mance of the driver during use or its bat-

tery capacity.

WARNING:

• Be sure to attach the belt hook

securely to the main unit with the screw

firmly fastened. When the belt hook is

not firmly attached to the main unit, the

hook may depart and the main unit

may fall.

This may result in an accident or injury.

• Be sure to attach the belt hook firmly

and securely onto a waist belt or other

belt. Pay attention to the unit not

slipping off from the belt.

This may result in an accident or injury.

• When the main unit is held by the belt

hook, avoid jumping or running with it.

Doing so may cause the hook to slip

and the main unit may fall.

This may result in an accident or injury.

• When the belt hook is not used, be

sure to return it to the storing position.

The belt hook may catch on something.

This may result in an accident or injury.

• When the unit is hooked onto the waist

belt by the belt hook, do not attach

driver bits to the unit.

A sharp edge object, such as a drill bit,

may cause injury or an accident.

To set the belt hook angle

position

1. Slide the belt hook lock lever # and

hold it to unlock the belt hook.

2. Pull the belt hook from

storing position $ and

set it as desired angle.

3. Release the belt hook

lock lever to lock the

angle of belt hook.

4. Make sure the belt hook is firmly locked

%. Also make sure the belt hook is firmly

locked into position.

• The belt hook cannot

be locked in this posi-

tion. Firmly lock it into

position before use.

To return the belt hook to the storing

position, Follow step 1. and 2. above, then

lower the belt hook.

To secure the lock, follow 3 and 4 above.

Forward Reverse

Switch lock

Caution: DO NOT STARE INTO BEAM.

This product has the built-in LED light.

This product is classfied into “Class 1 LED

Product” to EN 60825-1.

CLASS 1 LED PRODUCT







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic EY7201 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info