Bedienungsanleitung Panasonic GP-VD131 (Seite 12 von 26) (Englisch)

628262

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Operating precautions

Handle the unit carefully.

Do not drop the unit or subject it to strong impact or

vibration. Doing so may cause the unit to malfunction.

When the unit is not in use

Turn off the unit’s power when it is not in use.

When the unit is no longer going to be used, do not leave it

lying around, but be absolutely sure to dispose of it properly.

Do not touch the optical system parts.

Under no circumstances must they be touched.

In the unlikely event that they have become dusty, remove

the dust by using a camera blower or by wiping them gently

with a lens cleaning paper.

Do not allow foreign matter to make contact with the

rotating parts.

Otherwise, trouble may be caused.

Keep the unit away from water.

Avoid all contact with water. Otherwise, problems may occur.

Maintenance

Be sure to unplug the power cable before proceeding with

maintenance.

Otherwise, you may injure yourself.

Wipe the surfaces using a soft dry cloth. Avoid all contact

with benzine, paint thinners and other volatile substances,

and avoid using these substances. Otherwise, this may

result in the deformation or discoloration of the casing.

Do not turn the camera head by hand.

Turning the camera head by hand may cause the unit to

malfunction.

Use the unit in an environment with minimal moisture

and dust.

Avoid using the unit in an environment with high

concentration of moisture or dust since these conditions will

damage the internal parts.

Disposal of the unit

When the unit has reached the end of its service life and is

to be disposed of, ask a qualified contractor to dispose of

the unit properly in order to protect the environment.

When using the automatic functions

 When using the automatic white balance setting (auto

tracking white adjustment) function under fluorescent

lights, the white balance may vary.

 In some situations, it may be hard to focus at the auto

setting. In cases like this, select the manual setting, and

focus manually.

Zooming and focusing

When the focus is set manually, out-of-focusing may occur

during zooming.

After zooming, if necessary, either adjust the focus or set the

focus to auto.

When using the focus at the manual setting, proceed with

zooming after setting the focus position at the Tele end

where the focusing accuracy is higher.

(However, if the distance from the unit to the subject is less

than 30 cm {0.98 feet}, the subject may shift out of focus at

the Wide end.)

If zooming is performed to the Tele end after having adjusted

the focus at the Wide end, out-of-focusing may occur.

Concerning the home position

The ‘home position’ refers to the position to which the lens

moves first when the unit’s power has been turned on.

The home position settings (position, brightness, white

balance and focus) are the same as the preset 5 settings. To

change any of the home position settings, register them in

preset 5.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic GP-VD131 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic GP-VD131

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info