628269
16
Zoom out
Zoom in
Vorherige Seite
1/194
Nächste Seite
15 (E)
White balance adjustment
5 Press the [] or [] button to bring the cursor
to “AWB Mode”.
6 Press the [] button.
“AWB Mode” starts blinking.
7 Press the [] or [] button to change the AWB
mode to be used to “AWB A” or “AWB B”, and
press the [] button to enter the selection.
8 Press the [MENU] button for at least
2 seconds.
The menu display is exited.
9 Press the [SET] button for at least 2 seconds.
The auto white balance adjustment (AWB) is performed,
and the white balance setting is entered.
 When the white balance adjustment is completed
successfully, “AWB OK” appears in the centre of the
screen.
AWB OK
 When the adjustment has failed, an error message
such as “OUT RANGE NG”, “HIGH LIGHT NG”,
“LOW LIGHT NG” or “ATW NG” is displayed.
 ON must be selected as the OSD Status setting in
order for messages to be displayed.
[Top Menu]>[System]>[OSD Status] on [Other 2/2]
 White balance may not be correctly set if the lighting
of the object is too weak.
 Since the unit has a built-in memory, the set white
balance will remain in the memory even if power
is turned off. Therefore, it is not necessary to reset
the white balance if the colour temperature of those
objects remains unchanged. However, it must be reset
if the colour temperature changes, such as when you
move from indoors to outside, or vice versa.
Notes
 Auto tracking white adjustment (ATW)
When the white balance adjustment is set to “ATW”, the
white balance continues to be adjusted automatically all
the time, and it is automatically corrected even when the
light source or colour temperature has changed to produce
completely natural pictures.
This function works when “ATW” is selected instead of
“AWB A” or “AWB B” by following the steps for “Automatic
adjustment” in “White balance adjustment” (page 14).
 ATW might not function properly when high brightness
light (ex. fluorescent lamp) beams into a screen.
 White balance may not be accurately set if there is no
white object in the scene being shot.
 The white balance may shift out of adjustment when
a different kind of light source such as sunlight or
fluorescent lighting applies.
Notes
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic GP-VD150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic GP-VD150

Panasonic GP-VD150 Installationsanweisung - Deutsch, Englisch, Französisch, Italienisch, Spanisch - 158 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info