735119
156
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
Chapter 7 Output and Screen Display Screen status display
- 156 -
Screen status display
Screen display during shooting
*1 Displayed when using .
*2 The tally lamp is available when the handle unit ( supplied, optional) is attached.
1
Time code
Each time you press the USER button assigned to [COUNTER] or touch the USER button icon, the next display is shown or it switches to no display.
[TCG **:**:**:**]: Displays the time code. [TCR **:**:**:**] will be displayed during playback.
[UBG ** ** ** **]:Displays the user bits. [UBR ** ** ** **] will be displayed during playback.
[CLIP *:**:**:**]: Displays the counter value of each clip. This is displayed when the [RECORDING] menu [REC COUNTER] is set to
[CLIP]. Displays the counter value of the clip being played back during playback.
[*:**:**:**]: Displays the cumulative counter value from the reset position. This is displayed when the [RECORDING] menu [REC
COUNTER] [TOTAL] is set.
2
Frame rate
[S.SLOW120]: Displayed when set to the [SYSTEM] menu [SUPER SLOW] [ON] and the [SYSTEM] menu [FREQUENCY] [59.94Hz].
[S.SLOW100]: Displayed when set to the [SYSTEM] menu [SUPER SLOW] [ON] and the [SYSTEM] menu [FREQUENCY] [50.00Hz].
(No display): It is not displayed when set to the [SYSTEM] menu [SUPER SLOW] [OFF].
3
<AUTO/MANU> switch
Displayed when the <AUTO/MANU> switch is set to <AUTO>.
4
Message display area for stop of cooling fan
Displays a message when the cooling fan has stopped.
5
Recording status
Displays the recording status of the memory card in card slot 1 or card slot 2.
, : Not target for recording.
(flashing), (flashing): Recognizing the memory card.
, : The recording is stopped while the recording target memory card is inserted.
, : Recording.
(Flashing red dot), (Flashing red dot): Processing to stop the recording.
[P ], [P ]: Recording is stopped with pre-recording is enabled and the recording target memory card is inserted.
(No display): It is in one of the following conditions.
j A memory card has not been inserted.
j The memory card cannot be recognized.
The following indicators are displayed in card slot 1 only.
[P]:Pre-recording is enabled, and the memory card is not inserted in the card slot, or the memory card is not recognized.
:The tally lamp is instructed to illuminate in red via network.
*2
:The tally lamp is instructed to illuminate in green via network while the recording is stopped.
The tally lamp on the handle unit does not illuminate green.
*2
TCG 1 2 : 3 4 : 5 6 : 2 8
2160-59.94p
MOV HEVC 200M
A001C001
Ach
IP REMOTE
30dB ND:CLR 1/8000 F5.6
+1.0EVDEC 3 1 2 0 2 0 1 0 : 4 5 : 3 0
iZ50
MF99
D2x
IR
70%
HDMI INTRVL
ND1/16
FLUO
999min 999min
S.SLOW120
FBC
RELAY
DRS
STD
[ + ]
CH1
CH2
ICONS
VOLUME [ - ]
1 2 3 5 6 7 5 6 8 9 10 11
15 16 17 18 19 20 21 22 23 24
38
26
28
30
31
41
42
43
27
25
29
39
40
30
44
45
32
33
34
35
36
37
4 12
13 14
X2000
X2000 X1500
156

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic HC-X2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic HC-X2000

Panasonic HC-X2000 Bedienungsanleitung - Deutsch - 200 seiten

Panasonic HC-X2000 Kurzanleitung - Holländisch - 58 seiten

Panasonic HC-X2000 Bedienungsanleitung - Französisch - 200 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info