Bedienungsanleitung Panasonic HC-X2000 (Seite 162 von 200) (Englisch)

735119

162

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Chapter 7 Output and Screen Display — Screen status display

- 162 -

Mode check display

The unit’s settings and status can be displayed on the viewfinder or LCD monitor screen for check.

Press the <DISP/MODE CHK> button for 1 second or more while displaying the camera image screen to display the STATUS screen of the mode check.

Each time you press the <DISP/MODE CHK> button, the display switches in the order STATUS screen, FUNCTION screen, AUDIO screen, SWITCH

screen, NETWORK screen, camera image screen.

Each screen of the mode check is displayed for approximately 5 seconds.

The screen does not switch while the <DISP/MODE CHK> button is pressed.

Press the <EXIT> button while each screen is displayed to return to the camera image screen.

NOTE

0 The mode check screen cannot be displayed even when you press the <DISP/MODE CHK> button in the following case:

j When the [VIDEO OUT/LCD/VF] menu → [LCD] → [SELF SHOOT] → [MIRROR] is set and the LCD monitor is rotated toward the lens (when mirror

shooting)

FUNCTION screen

Displays the video output settings and information of the recording media.

*1 Displayed when using .

41 Waveform monitor ll——

42 IR recording l — l —

43 Digital zoom l — l —

44 Focus l — l —

45 Audio monitor volume adjustment llll

Item Description

[SDI OUT]

[VIDEO OUT FORMAT] Displays with [1920×1080p]/[1920×1080i]/[1920×1080PsF]/[1280×720p] the

signals output through the <SDI OUT> terminal.

[VIDEO OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <SDI OUT>

terminal are superimposed.

[HDMI OUT] [VIDEO OUT FORMAT] Displays with [3840×2160p]/[3840×2160p(420/8bit)]/[1920×1080p]/

[1920×1080i]/[1280×720p]/[720×480p]/[720×576p] the signals output through

the <HDMI> terminal.

[VIDEO OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <HDMI>

terminal are superimposed.

[CARD STATUS] — Displays the status, remaining recording capacity, and the total capacity of the

memory card inserted in the card slot.

The status of the memory card that is displayed are following types.

≥ [NO CARD]: Memory card is not inserted.

≥ [UNSUPPORTED]: Memory card is not supported.

≥ [FORMAT ERROR]: Memory card cannot be used. (Format error)

≥ [PROTECTED]: It is write protected. (The write-protection switch of the

memory card is set to the LOCK side)

≥ [NO REMAIN]: There is no remaining recording capacity.

≥ [NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4

recording.

≥ Cases other than above: The remaining recording capacity is displayed in 0%

through 100%.

[TOTAL] Displays the remaining recording capacity/total capacity of the memory cards in

the card slot 1 and the card slot 2.

[SLOT1] Displays the status and remaining recording capacity/total capacity of the

memory card in card slot 1.

[SLOT2] Displays the status and remaining recording capacity/total capacity of the

memory card in card slot 2.

No Item

Camera image

screen

When the <DISP/

MODE CHK> button

is pressed

STATUS Playback screen

X2000

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HC-X2000 Seite 162

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HC-X2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info