Bedienungsanleitung Panasonic HC-X800 (Seite 159 von 176) (Englisch)

468005

159

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

159

VQT4C83

Do not use the unit for surveillance

purposes or other business uses.

≥ This unit was designed for consumer

intermittent use. It was not intended for

continuous use, or for any industrial or

commercial application resulting in

prolonged use.

≥ In certain situations, continuous use could

cause the unit to overheat and cause a

malfunction. Such use is strongly

discouraged.

When you are not going to use the unit

for an extended time

≥ When storing the unit in a cupboard or

cabinet, it is recommended that you place

a desiccant (silica gel) in with it.

When disposing of or giving away this

unit, note that:

≥ Formatting and deletion simply change the

file management information and cannot

be used to completely erase the data in

built-in memory of this unit. The data can

be recovered using commercially available

software or the like.

≥ We recommend that you physically format

the built-in memory before disposing of or

giving away this unit.

To physically format the built-in memory,

connect the unit via the AC adaptor, select

[SETUP] # [FORMAT MEDIA] # [Built-

inMemory] from the menu, and then press

and hold the recording start/stop button on

the screen below for about 3 seconds.

When the built-in memory data deletion

screen appears, select [YES], and then

follow the on-screen instructions.

≥ Please look after the data in your built-in

memory carefully. Panasonic will not be

held responsible in the unlikely case that

private data is divulged.

The battery used in this unit is a

rechargeable lithium-ion battery. It is

susceptible to humidity and temperature and

the effect increases the more the

temperature rises or falls. In cold areas, the

full charge indication may not appear or the

low battery indication may appear about

5 minutes after starting use. At high

temperatures, the protection function may

be triggered, making it impossible to use the

unit.

Be sure to detach the battery after use.

≥ If the battery is left attached, a minute

amount of current continues to flow even if

the unit is off. Keeping the unit in this state

may result in over discharge of the battery.

This may result in you not being able to

use the battery even after it is charged.

≥ The battery should be stored in the vinyl

bag so metal does not come into contact

with the terminals.

≥ The battery should be stored in a cool

place free from humidity, with as constant

temperature as possible. (Recommended

temperature: 15 oC to 25 oC,

Recommended humidity: 40%RH to

60%RH)

≥ Extremely high temperatures or low

temperatures will shorten the life of the

battery.

≥ If the battery is kept in high-temperature,

high-humidity, or oily-smoky places, the

terminals may rust and cause

malfunctions.

≥ To store the battery for a long period of

time, we recommend you charge it once

every year and store it again after you

have completely used up the charged

capacity.

≥ Dust and other matter attached to the

battery terminals should be removed.

HC-X900M

About the battery

HC-X900&X900M&X800EB-VQT4C83_mst.book 159 ページ２０１２年１月１６日　月曜日　午後１時２９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HC-X800 Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HC-X800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info