Bedienungsanleitung Panasonic HDC-DX1 (Seite 114 von 128) (Englisch)

65196

114

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Others

114

VQT1A02

Problem Check points

Recording starts but

stops immediately.

The playback picture

breaks up for a moment.

≥Is the disc scratched or dirty?

# Wipe off the dirt on the disc. (l 25) If the disc is scratched, insert

a new one.

≥The unit is hot. Follow the messages on the display. To use the unit

again, turn the unit off and leave it for a while.

The unit arbitrarily stops

recording.

≥Is the AGS function activated?

# Record in the normal horizontal position or set [AGS] to [OFF].

(l 44)

Auto focus function does

not work.

≥Is manual focus mode selected?

# Set the AUTO/MANUAL/FOCUS switch to AUTO.

≥Are you trying to record a scene which is hard to bring into focus in

auto focus mode?

# There are some recording subjects and surroundings for which

the auto focus does not operate correctly. (l 122) If so, use the

manual focus mode to adjust the focus. (l 65)

Recorded still pictures

are not clear.

≥Are you trying to record small or finely detailed objects with

[PICT. QUALITY] set at [ ]?

# If you try to record small or finely detailed objects with

[PICT. QUALITY] set at [ ], the images may break up into a

mosaic-like pattern. Record with [PICT. QUALITY] set at [ ]

instead. (l 51)

Sound is not played back

from the built-in speaker

of this unit.

≥Is the volume too low?

# During playback, move the volume lever to display the volume

indication and adjust it. (l 71)

Sound is played back

from one side of

speakers when motion

pictures recorded on this

unit are played back on

another device.

≥The internal microphones of this unit record sound with Dolby Digital

5.1 Creator. When the sound is played back on another device, if

stereo 2 channel speakers on TV are used, the sound may be

played back from one side of the speakers.

When the TV has surround sound effect function, we recommend

using it.

Refer to the operating instructions of the TV for how to operate the

surround sound effect.

Although this unit is

correctly connected to a

TV, images cannot be

seen.

The images are squeezed

horizontally.

≥Does the input switch on the TV match the connected terminal?

# Please read the operating instructions of your TV and select the

channel that matches the input used for the connection.

≥Is the [TV ASPECT] setting correct?

# Change the setting to match the aspect ratio of the TV.

Press the MENU button, then select [SETUP] # [TV ASPECT]

# [16:9] or [4:3] and press the cursor button.

≥Are the HDMI and component cables connected to the unit while in

recording or PC connection mode?

# If both HDMI and component cables are to be connected, set the

unit to playback mode.

VQT1A02ENG.book 114 ページ２００７年１月２９日　月曜日　午後８時６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HDC-DX1 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HDC-DX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info