Bedienungsanleitung Panasonic HDC-DX1 (Seite 120 von 128) (Englisch)

65196

120

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

120

VQT1A06

Others

≥If there is dust, a scratch, or dirt on disc or if

it is warped, the following phenomena may

occur:

– Block noise in playback image

– Momentary stop of playback image

– Sound interrupted during playback, or

abnormal sound

– [ ] appears for thumbnail displays

– Disc cannot correctly be recognised

– Delay between video and audio

When the ACCESS/PC lamp is illuminated

(during access to the disc), do not open the

disc cover, turn off the power, or cause any

vibrations or impacts.

DVD-R/DVD-R DL

≥For optimum recording on DVD-R or DVD-R DL

discs, this unit writes control data to a DVD-R

or DVD-R DL used for recording when it is

being inserted and ejected. If the disc has no

area for control data to be written, recording

may not be possible. To prevent this, do not

insert a DVD-R or DVD-R DL which has been

recorded on more than 50 times.

≥Do not insert a DVD-R or DVD-R DL recorded

on this unit that has not been finalized into a

recordable device, such as a DVD recorder.

The recorded data may be damaged.

≥The memory capacity indicated on the label of

an SD card is the total of the capacity for

capacity which can be used on the unit, a

computer etc.

≥During prolonged use, the unit’s surfaces and

the SD card will heat up slightly. This is normal.

Always set the mode dial to OFF when

inserting or removing an SD card.

While this unit accesses the SD card (while

or is being displayed/the access lamp

is lit), do not remove the SD card, operate the

mode dial, turn off the power or shake or

impact the unit.

ª About the miniSD Card

≥Be sure to insert miniSD Cards in the dedicated

card adaptor before use. Inserting a card in this

unit without the adaptor may damage the unit

or the card.

≥Do not insert an empty card adaptor in this unit.

Do not leave the adaptor in this unit while

inserting or removing miniSD Cards. This may

cause the unit to malfunction.

≥When the LCD monitor gets dirty, wipe it with a

dry soft cloth.

≥In a place with drastic temperature changes,

condensation may form on the LCD monitor.

Wipe it with soft dry cloth.

≥When the unit has become very cold, for

example due to storage in a cold area, its LCD

monitor will be slightly darker than usual

immediately after the power is turned on. The

normal brightness will be restored when the

unit’s internal temperature rises.

About the disc

About the SD card

LCD monitor/viewfinder

Extremely high precision technology is

employed to produce the LCD Monitor screen

featuring a total of approximately

251,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of

the pixels inactive or always lit. However, this

is not a malfunction and does not affect the

recorded picture.

Extremely high precision technology is

employed to produce the viewfinder screen

featuring a total of approximately

183,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of

the pixels inactive or always lit. However, this

is not a malfunction and does not affect the

recorded picture.

VQT1A06ENG.book 120 ページ２００７年１月２５日　木曜日　午後８時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HDC-DX1 Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HDC-DX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info