Bedienungsanleitung Panasonic HDC-TM20 (Seite 73 von 164) (Englisch)

106218

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

VQT1Y00

Digital cinema color:

≥ When motion pictures recorded while this

function is turned [ON] are played back

with a TV not compatible with x.v.Color

™

colors may not be reproduced properly.

≥ To play back images recorded in Digital cinema

color with vivid colors of wider color ranges, a

device compatible with x.v.Color

™

is required.

When these images are played back with

devices other than ones compatible with

x.v.Color

™

, it is recommended to record the

images after this function is turned [OFF].

≥ x.v.Color

™

is a name for devices that are

compatible with the xvYCC format, an

international standard for expanded color in

motion pictures, and that follow the rules for

signal transmission.

Wind noise reduction:

≥ When the Intelligent auto mode is set to on,

[WIND CUT] is set to [ON], and the setting

cannot be changed.

≥ The sound quality may be changed if this

function is activated in strong winds.

Microphone setup:

≥ If you wish to record higher quality sound and

maintain realism even when zooming in, for

instance, when recording a music recital, we

recommend setting [MIC SETUP] to

[SURROUND].

Microphone level:

≥ When the Intelligent auto mode is on, the

setting is fixed to [AUTO] and cannot be

changed.

≥ When [MIC SETUP] is [ZOOM MIC], the

volume will be different depending on the zoom

rate.

≥ The microphone input level meter shows the

largest volume for the microphones.

≥ You cannot record with the audio completely

muted.

Hi-speed burst shooting:

≥ If you turn off the power or change the mode to

, this function is canceled.

≥ The maximum number of times you can record

on a media is 15.

(In the case of SD cards it is the maximum

number of recordable scenes per card.)

≥ Color balance and brightness on the screen

may change with some light sources such as

fluorescent lamps.

≥ Image quality is different from ordinary still

picture recording.

Self-timer:

≥ The self-timer standby mode is canceled when

you press the recording start/stop button to

start motion picture recording.

≥ Setting the self-timer to [2 SECONDS] is a

good way to prevent image shake when the

button is pressed while using a tripod etc.

Built-in flash:

≥ Set the flash to [OFF] where using a flash is

prohibited.

≥ If the ß indication etc. flashes when the

button is pressed halfway, the flash is not

activated.

≥ The available range of the flash is approx. 1 m

to 2.5 m (3.3 feet to 8.2 feet) in dark places.

≥ Using the flash fixes a shutter speed to 1/500

or slower.

Red eye reduction:

≥ The flash is activated 2 times.

≥ Red eye phenomenon may appear depending

on the recording conditions.

≥ When faces are detected in the Intelligent auto

mode, the red eye reduction is set to on.

≥ A conversion lens (optional) can block the flash

and may cause a vignetting effect.

HDCSD20&SD25&HS20P-VQT1Y00_eng.book 73 ページ２００８年１２月２２日　月曜日　午後８時１６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HDC-TM20 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HDC-TM20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info