Bedienungsanleitung Panasonic hdc tm300 (Seite 63 von 160) (Englisch)

291886

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

VQT1Z27

Recording

Recording (Basic)

AF tracking

It is possible to set the focus and exposure to the subject specified on the touch screen.

The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)

¬Change the mode to or .

1 Touch .

A Target frame

≥ will be displayed on the screen.

≥ The prioritized face framing (orange) will

change to the target frame when the

Intelligent auto mode is (Portrait), and

it will track the face that was framed.

≥

Available target lock range will be displayed

in red frame when the Intelligent auto mode

is set to anything but (Portrait).

Touch the object and lock the target.

≥

When you touch the head of the object, the target

frame on the head gets locked and tracking starts.

≥ Touch the object to be changed again

when you want to change the target.

≥ When the Intelligent auto mode is selected,

the setting becomes (Normal) and

touched object is tracked. Selection

becomes (Portrait) when target frame

is locked on head.

3 Start recording.

≥ When you touch [CANCEL], the tracking

function will be cancelled.

∫ About target frame

≥ The frame out assist B is displayed when the

target frame gets close to framing out.

≥ When target lock fails, the target frame blinks

in red and then disappears. In such cases,

touch the object again and lock the target.

≥ When the button is pressed halfway, the

focus is set to the object that is locked. The

target frame turns green when it focuses, and

the target cannot be changed.

≥ This function cannot be used in manual mode.

≥ This function cannot be used when the scene

mode is set to the fireworks mode in still

picture recording mode.

≥ It may track different objects or may not lock

the target depending on the recording

conditions such as the following:

jWhen the object is too large or too small

jWhen colour of the object is similar to the

background

jWhen using zoom

jWhen the camera is shaking

jWhen more than one object overlaps

jWhen the scene is dark

jWhen the subject moves quickly

≥ When the target is locked in still picture

recording mode, the screen may become dark

or the AF assist lamp may turn on.

≥

A message will be displayed when an object

becomes unable to be tracked half-way through.

In such cases, touch the object one more time.

≥

AF tracking will be cancelled in the following cases.

jWhen the mode is changed

jWhen the power is turned off

jWhen the scene mode is set

jWhen the Intelligent auto mode is set on/off

≥ After setting [DISPLAY] to [OFF] if no operation

is performed for about 3 seconds, the

operation icon disappears. Touch the screen to

display the icon again. When the AF tracking is

used, the icon does not disappear.

HDCTM300&HS300EB-VQT1Z27_mst.book 63 ページ２００９年１月２１日　水曜日　午後３時７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic hdc tm300 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic hdc tm300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info