Bedienungsanleitung Panasonic HX-A100 (Seite 21 von 32) (Englisch)

502127

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

VQT4X90

After making the settings according to the setup wizard screens, you can use the main functions of this unit.

Proceed to complete the setup by following the on-screen instructions.

≥ The setup wizard is displayed at the time of purchase and after a long period of non-use during

which the battery ran down.

1 Synchronize the time of this unit with that of smartphone.

≥

Once the clock is set, recording, live broadcasting, and other functions of this unit can be used correctly.

≥

It may take approximately 60 seconds to synchronize the time of the smartphone with that of this unit.

2 Change the SSID and password for this unit.

≥

When the SSID and password for this unit are set to the default ones, the setup wizard is displayed.

≥ Change the SSID and password for this unit.

j Enter an SSID consisting of alphanumeric characters and/or symbols. The length must be

between 1 to 32 characters.

j Enter a password consisting of both alphabetic and numeric characters. The length must be

between 8 to 64 characters.

j When connecting to the smartphone after changing the SSID and password, connect with a

new SSID and password.

3 Make the connection settings for the access point mode to use

devices connected to a wireless router, etc.

≥ Enter the SSID and password (authentication key) of the access point.

∫ When connecting by (If the device is Android)

1 Ta p .

2 Tap the wireless access point to connect.

3 Enter password.

≥ This allows you to operate this unit via an access point using your smartphone.

4 Make the connection destination settings for a live broadcast.

≥ Enter the SSID and password (authentication key) of the access point.

Up to three access points can be registered. Register the access point you use, such as the

wireless router in your home or the mobile router you use outside.

≥ The settings can also be made from the Image App menu.

≥ You can perform a live broadcast by setting the following.

j Make the live broadcast settings.

For detail, refer to the Operating Instructions. (PDF format)

Setting up with Setup Wizard

≥ If the default SSID and password for this unit are used, a third party may obtain

compromised information or use the SSID and password for unlawful purposes. Make

sure to change the SSID and password.

≥ We recommend you periodically change the SSID and password for this unit.

≥ Set a password different from an SSID. Avoid setting a password that can be easily

guessed, and set the one consisting of both alphabetic and numeric characters.

≥ If a new SSID and password have been written down on a piece of paper, etc., manage

them so that they will not be compromised.

For compatible access points, see the following support site.

http://panasonic.jp/support/global/cs/e_cam/index.html (This Site is English only.)

HX-A100_VQT4X90_mst.book 21 ページ２０１３年１月２２日　火曜日　午後８時８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HX-A100 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HX-A100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info