Bedienungsanleitung Panasonic HX-A1M (Seite 7 von 36) (Englisch)

596757

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

(ENG) SQT0886

≥ Do not leave this unit for a long period of time in places where temperature is very low (at high

altitude etc.) or very high (inside a car under strong sunlight, close to a heater, on the beach, etc.)

waterproof performance may be degraded.

≥ The inside of this unit is not waterproof. Water leakage will cause malfunction.

≥ If any foreign objects are found on the internal components, threaded portions, rubber

seals or other parts of this unit, remove them with a soft dry cloth.

≥ If any liquid such as water droplets are found on the internal components, threaded

portions, rubber seals or other parts of this unit, wipe it off with a soft dry cloth. Do not

attach/remove the terminal cover (waterproof) or glasscover near water, underwater, with

wet hands or when this unit is wet. Doing so may cause water to leak in.

≥ The alert sound and shutter sound may be lowered when using this unit. This is for ensuring the

waterproof performance of this unit, and not a malfunction. Attaching/removing the terminal cover

(waterproof) or glasscover will restore the original volume.

≥ This unit is not waterproof when the terminal cover (USB connection) is in use. In this case, do

not use this unit underwater or touch it with wet hands.

∫ About Condensation (When the lens is fogged up)

Condensation occurs when there is a change in temperature or humidity, such as when the unit is

taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens to

become soiled, moldy, or damaged.

When taking the unit to a place which has a different temperature, if the unit is accustomed to the

room temperature of the destination for about one hour, condensation can be prevented. (When the

difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the

bag, and seal the bag.)

When condensation occurs, turn off this unit, remove the terminal cover (waterproof) and

glasscover, and leave this unit for approximately 2 hours. Once this unit adjusts to the ambient

temperature, the condensation will disappear naturally.

1 Rotate the terminal cover (waterproof) and glasscover in the directions of the

arrows to remove them.

2 Check that no foreign objects are found on the internal components,

threaded portions and rubber seals of this unit.

≥ If there are any foreign objects, such as lint, hair, sand, etc., water will leak within a few seconds

causing malfunction.

3 If there is foreign objects adhering to the unit, remove it with a soft dry cloth.

≥ Check to see if any foreign objects such as lint is adhering to this unit.

≥ Wipe it off with a dry soft cloth if there is any liquid. It may cause water leaks and malfunction if

you use this unit with liquid adhered.

≥ Use a blower (commercially available) to remove foreign objects that cannot be removed with a

dry soft cloth.

Check before using underwater

Do not attach/remove the terminal cover (waterproof) or glasscover in sandy or dusty

locations, near water or with wet hands. If sand or dust adheres to this unit, water may leak

in.



 



HX-A1M-SQT0886_mst.book 7 ページ２０１５年６月１日　月曜日　午前１１時５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic HX-A1M Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic HX-A1M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info