Bedienungsanleitung Panasonic KX-A406 (Seite 8 von 36) (Englisch)

628526

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Environment

R K

eep the repeater away from electrical noise generating devices, such as fluorescent lamps and

motors.

R The repeater should be kept free from excessive smoke, dust, high temperature, and vibration.

R The repeater should not be exposed to direct sunlight.

R Do not place heavy objects on top of the repeater.

R When you leave the repeater unused for a long period of time, unplug the repeater from the AC outlet.

R The repeater should be kept away from heat sources such as radiators, cookers, etc. It should not be

placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp

basements should also be avoided.

R The maximum calling distance may be shortened when the repeater is used in the following places:

Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.

R Operating the repeater near electrical appliances may cause interference. Move away from the

electrical appliances.

R To prevent malfunction, deformity, overheating, rust, and discolouration, do not install or place

equipment in the following types of locations:

– Locations where air ventilation is poor.

– Locations that may be exposed to sulphurous gas, such as near hot springs.

– Near devices that emit heat, such as heaters.

– Near devices that emit electromagnetic noise, such as radios or televisions.

– Near devices that emit high-frequency noise, such as sewing machines or welders.

Routine care

R W

ipe the outer surface of the repeater with a soft moist cloth.

R Do not use benzine, thinner, or any abrasive powder.

R Disconnect the AC adaptor cord from the product before cleaning. Clean the product with a soft, dry

cloth. Do not use liquid, aerosol cleaners, abrasive powders, or chemical agents to clean the product.

Placement

R I

nstall the repeater within CS/base unit range in an indoor environment. We recommend installing the

repeater in a raised position (such as on a wall).

R Avoid positioning the repeater close to objects that will interfere with reception, such as thick walls,

radiators, metal shelving, etc.

R For maximum distance noise-free operation, place the repeater away from electrical appliances such

as TV, radio, personal computer, or other telephone equipment.

R Keep an appropriate distance from the CS/base unit to maximize the range of your phone system.

Find the appropriate location by checking the RSSI

/ID indicator. If the RSSI/ID indicator turns red or

amber, re-position the repeater in a place where the RSSI/ID indicator turns green.

For details about the RSSI/ID indicator, refer to the following pages.

When using the repeater with

– Cell Stations: refer to "Indicators (Page 12)",

– SIP Cordless Phones: refer to "Indicators (Page 22)", and

– Digital Cordless Phones: refer to "Indicators (Page 27)".

*1 RSSI: Received Signal Strength Indication

Important Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-A406 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic KX-A406

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info