Bedienungsanleitung Panasonic KX-FL511 (Seite 40 von 82) (Englisch)

16793

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

4. Fax

4 Enter the fax number.

Using stations 1–11:

Press the desired station key.

Using stations 12–22:

Press {LOWER}, then press the desired

station key.

Using navigator directory:

Press {<} or {>}, then press {A} or {B}

repeatedly to display the desired entry and

press {SET}.

Fax auto redial

If the line is busy or if there is no answer, the unit

will automatically redial the number up to 2

times.

L To cancel redialing, press {STOP}.

If your unit does not send a fax

L Confirm the stored telephone number on the

display and check that the number dialed is

answered by the other party’s machine.

L The connecting tone will be heard during

dialing to tell you the status of the other

party’s machine (feature #76, page 48).

4.4 Broadcast

transmission

By programming entries from one-touch dial

(page 31) and navigator directory (page 31) into

the broadcast memory, you can send the same

document to multiple parties (up to 20). Your

programmed entries will remain in the broadcast

memory, allowing frequent re-use. See page 39

for broadcast transmission instructions.

L The broadcast function utilizes stations 1–3.

The one-touch dial function will be disabled.

L Keep the front cover page open for button

locations.

4.4.1 Programming entries into

the broadcast memory

1 Press {DIRECTORY PROGRAM}.

2 Select the desired broadcast key.

For BROADCAST 1-2:

1. Press the desired {BROADCAST} key.

2. Press {A} or {B} repeatedly to select

“BROADCAST”.

For MANUAL BROADCAST:

1. Press {MANUAL BROAD}.

2. Press {A} or {B} repeatedly to select

“MANUAL BROAD”.

3 Press {SET}.

4 Program entries.

Using stations 1–11:

Press the desired station key.

Using stations 12–22:

Press {LOWER}, then press the desired

station key.

Using navigator directory:

Press {A} or {B} repeatedly to display the

desired entry, and press {SET}.

Using the dial keypad (only for MANUAL

BROAD):

Enter the fax number and press {SET}.

L To program other entries, repeat this step

(up to 20 entries).

5 Press {SET} after programming all of the

desired entries.

L To program another broadcast key,

repeat steps 2 to 5.

6 Press {STOP} to exit the program.

Note:

L If you program the wrong entry, press

{STOP} after step 4 to erase the entry.

L Confirm the stored entries by printing a

broadcast programming list (page 66).

4.4.2 Adding a new entry into the

broadcast memory

After initial programming, you can add new

entries (up to a combined total of 20).

1 Press {>}.

L Confirm that there are no documents in

the document entrance.

2 Press {A} or {B} repeatedly to display the

desired broadcast memory

(“<BROADCAST1>”, “<BROADCAST2>” or

“<MANUAL BROAD>”).

3 Press {DIRECTORY PROGRAM}.

4 Press {*}.

5 Press {A} or {B} repeatedly to display the

desired entry.

6 Press {SET}.

L To add other entries, repeat steps 5 and 6

(up to 20 entries).

chapter4 Page 38 Friday, April 18, 2003 10:18 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-FL511 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic KX-FL511

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info