Bedienungsanleitung Panasonic KX-FL511 (Seite 49 von 82) (Englisch)

16793

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

7. Programmable Features

“ON”: A sending report will be printed out after

every transmission.

“OFF”: Sending reports will not be printed out.

Code #06: Changing the ring setting in FAX

ONLY mode

FAX RING COUNT

RINGS=3 [±]

To change the number of rings before the unit

answers a call in FAX ONLY mode.

You can select “1”, “2”, “3” (default), “4” or “5

EXT.TAM”.

Code #12: Enabling remote operation for an

answering machine

REMOTE TAM ACT.

MODE=OFF [±]

If you are using the unit with an answering

machine, activate this feature, and program the

remote activation ID to enable remote operation

of the answering machine.

1. Press {MENU}.

2. Press {#} then {1}{2}.

3. Press {A} or {B} repeatedly to select “ON”.

4. Press {SET}.

5. Enter your ID from 1 to 5 digits, using 0–9,

{*} and {#}.

L The default ID is “11”.

6. Press {SET}.

7. Press {MENU}.

Code #13: Setting the dialing mode

DIALING MODE

MODE=TONE [±]

If you cannot dial, change this setting depending

on your telephone line service.

“TONE” (default): For tone dial service.

“PULSE”: For rotary pulse dial service.

Code #16: Setting the recording paper size

PAPER SIZE

=LETTER [±]

“LETTER” (default): Letter size paper.

“LEGAL”: Legal size paper.

“A4”: A4 size paper.

Code #17: Setting the ringer pattern

RINGER PATTERN

MODE=A [±]

You can select “A” (default), “B” or “C”.

7.3 Advanced features

Code #22: Setting the journal report to print

automatically

AUTO JOURNAL

MODE=ON [±]

“ON” (default): The unit will print a journal report

automatically after every 30 new fax

communications (page 37).

“OFF”: The unit will not print a journal report, but

will keep a record of the last 30 fax

communications.

Code #23: Sending documents overseas

OVERSEAS MODE

MODE=ERROR [±]

If you have difficulty sending an overseas fax,

activate this feature before starting transmission.

L This feature is not available for broadcast

transmission.

L The calling charge may be higher as the

transmission speed is slowed down.

“NEXT FAX”: This setting is effective only for the

next attempted fax transmission. After

transmission, the unit will return to the previous

setting.

“ERROR” (default): When the previous fax

transmission fails and you wish to re-send the

document automatically.

“OFF”: Deactivates this feature.

Code #25: Sending a fax at a specific time

DELAYED SEND

MODE=OFF [±]

This feature allows you to take advantage of low-

cost calling hours offered by your telephone

company. This feature can be set up to 24 hours

in advance of the desired time.

To send a document:

1. Insert the document.

2. Press {MENU}.

3. Press {#} then {2}{5}.

4. Press {A} or {B} repeatedly to select “ON”.

5. Press {SET}.

6. Enter the fax number.

7. Press {SET}.

8. Enter the transmission start time.

L Press {*} repeatedly to select “AM” or

“PM”.

9. Press {SET}.

FL511.book Page 47 Thursday, April 17, 2003 1:42 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-FL511 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic KX-FL511

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info