Bedienungsanleitung Panasonic KX-FLB851 (Seite 66 von 110) (Englisch)

35537

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

8. Programmable Features

company. This feature can be set up to 24 hours

in advance of the desired time.

{0} “OFF” (default)

{1} “ON”

To send a document:

1. Insert the document into the auto document

feeder.

2. If necessary, change to the desired resolution

(page 26) and the desired contrast (page 26).

3. Press {MENU}.

4. Press {#}, then {4}{1}{2}.

5. Press {1} to select “ON”.

6. Press {SET}.

7. Enter the fax number.

L To enter an item using one-touch dial

feature and navigator directory, see step 4

on page 31. (When using navigator

directory, you do not have to press

{DIRECTORY} before pressing {V} or

{^}.)

8. Press {SET}.

9. Enter the transmission start time.

L Press {*} repeatedly to select “AM” or

“PM”.

10.Press {SET}.

L The document will be fed into the unit and

scanned into memory. The unit will then

send the data at the specified time.

Note:

L To cancel after programming, press {STOP}

then {SET}.

L You can also send a document using the

scanner glass. Press {SET} in step 10, then

press {START}.

{#}{4}{1}{3} Setting the Error Correction

Mode (ECM)

ECM SELECTION

MODE=ON [V^]

This feature is available when the sending /

receiving fax machines are ECM compatible.

{0} “OFF”: Deactivates this feature.

{1} “ON” (default): If there is an error during fax

transmission / reception, the unit will support the

communication.

{#}{4}{1}{6} Setting the connecting tone

CONNECTING TONE

MODE=ON [V^]

If you often have trouble when sending faxes,

this feature allows you to hear connecting tones:

fax tone, ring back tone and busy tone. You can

use these tones to confirm the status of the other

party’s machine.

{0} “OFF”: Deactivates this feature.

{1} “ON” (default): You will hear connecting

tones.

Note:

L If the ring back tone continues, the other

party’s machine may not be a fax machine or

may have run out of paper. Check with the

other party.

L The connecting tone volume cannot be

adjusted.

{#}{4}{3}{0} Activating the Distinctive Ring

feature

DISTINCTIVE RING

MODE=OFF [V^]

{0} “OFF” (default)

{1} “ON”

See page 41 for details.

{#}{4}{3}{1} Setting the ring pattern for fax

(Distinctive Ring feature)

FAX RING PATTERN

RING=B–D [V^]

{1} “A”

{2} “B”

{3} “C”

{4} “D”

{5} “B-D” (default)

See page 42 for details.

{#}{4}{3}{2} Receiving other size

documents

AUTO REDUCTION

MODE=ON [V^]

To receive a fax document that is longer than

your recording paper.

{0} “OFF”: The unit will print the original size.

{1} “ON” (default): The unit will fit received

documents onto your recording paper.

{#}{4}{3}{4} Changing the fax activation

code

FAX ACTIVATION

MODE=ON [V^]

If you wish to use an extension telephone to

receive faxes, activate this feature and program

the activation code.

{0} “OFF”

{1} “ON” (default)

1. Press {MENU}.

2. Press {#}, then {4}{3}{4}.

FLB851-PFQX2175YA-en.book Page 64 Thursday, September 8, 2005 2:24 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-FLB851 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info