Bedienungsanleitung Panasonic KX-PRD262 (Seite 17 von 88) (Englisch)

588420

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Link to cell feature

ou can connect your base unit and cellular

phone using Bluetooth wireless technology, so

that you can make or answer cellular calls

using your phone system.

This allows you to:

– use the unit to talk on cellular calls even if

some areas of your home have poor

cellular reception, simply by placing your

cellular phone in an area with good

reception.

– talk on cellular calls even if your cellular

phone is in your pocket or bag.

– enjoy cordless cellular calls even if your

cellular phone plugged in and charging.

Important:

R You may pair a maximum of 2 cellular

phones. However, the base unit allows only

one Bluetooth to be active at a time.

R The unit may not function properly with your

Bluetooth device’s phone app depending

on your Bluetooth device model, the

devices connected to your Bluetooth

device, and the apps installed on your

Bluetooth device.

R Your cellular phone must support the

Hands Free Profile (HFP) specification.

Pairing a cellular phone

mportant:

R For more details and the list of compatible

cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell

R Before pairing a Bluetooth enabled cellular

phone to the base unit, make sure that no

other Bluetooth device is connected to your

cellular phone.

1 Handset:

For CELL 1: MMENUN (right soft key)

#6241

For CELL 2: MMENUN (right soft key)

#6242

R After the corresponding CELL indicator

on the base unit starts flashing, the

rest of the procedure must be

completed within 5 minutes.

2 Y

our cellular phone:

While the corresponding CELL indicator

is flashing, follow the instructions of your

cellular phone to enter the pairing mode.

R Depending on your cellular phone, it

may ask you to enter the Bluetooth

PIN (default: “0000”). If your cellular

phone shows PassKey confirmation on

its display, follow the directions to

proceed.

3 Handset:

Wait until a long beep sounds.

R It may take more than 10 seconds to

complete pairing.

R When the corresponding CELL

indicator lights up, the cellular phone is

connected to the base unit. You are

ready to make cellular calls.

4 MOFFN

Note:

R Make sure that your cellular phone is set to

connect to this product automatically. Refer

to your cellular phone’s operating

instructions.

R Make sure you cancel your cellular phone’s

current pairing if you want to pair it to the

other line (page 17).

R The default setting for the text message

alert feature is “On(no announce)”, so

when you pair your cellular phone to the

base unit, this feature may be activated

(page 49). (This depends on the version

and type of cellular phone you are using.)

Unpairing a cellular phone

ou can cancel the pairing of a cellular phone

that is stored in the base unit.

1 For CELL 1: MMENUN (right soft key)

#6111

For CELL 2: MMENUN (right soft key)

#6112

2 MbN: “Yes” a MSELECTN

R When the cellular phone is unpaired,

the CELL indicator is turned off.

3 MOFFN

For assistance, please visit http://www.panasonic.com/help

Link to Cell

PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 17 2014/01/09 11:59:39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-PRD262 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info