Bedienungsanleitung Panasonic KX-PRL262 (Seite 56 von 88) (Englisch)

588419

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Answering system settings

Call screening

Handset / Base unit

hile a caller is leaving a message, you can

listen to the call through the unit’s speaker.

To adjust the speaker volume, press MDN or

MCN on the handset, or press MjN or MkN on

the base unit repeatedly.

You can answer the call by pressing M

the handset or MZN on the base unit.

Call screening can be set for each unit. The

default setting is “On”.

1 For handset setting: MMENUN (right soft

key) #310

For base unit setting: MMENUN (right

soft key) #*310

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

Number of rings before the unit

nswers a call

You can change the number of times the

phone rings “Ring count” before the unit

answers calls. You can select 2 to 7 rings, or

“Toll saver”.

The default setting is “4 rings”.

“Toll saver”: The unit’s answering system

answers at the end of the 2nd ring when new

messages have been recorded, or at the end

of the 5th ring when there are no new

messages. If you call your phone from outside

to listen to new messages (page 55), you

know that there are no new messages when

the phone rings for the 3rd time. You can then

hang up without being charged for the call.

1 MMENUN (right soft key) #211

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

For voice mail service subscribers

f you subscribe to a flat-rate service package

that includes Caller ID, call waiting, voice mail,

and unlimited local/regional/long distance

alls, please note the following:

R To use the voice mail service provided by

your service provider/telephone company

rather than the unit’s answering system,

turn off the answering system (page 51).

R To use this unit’s answering system rather

than the voice mail service provided by

your service provider/telephone company,

please contact your service provider/

telephone company to deactivate your

voice mail service.

If your service provider/telephone company

cannot do this:

– Set this unit’s “Ring count” setting so

that this unit’s answering system

answers calls before the voice mail

service of your service provider/

telephone company does. It is necessary

to check the number of rings required to

activate the voice mail service provided

by your service provider/telephone

company before changing this setting.

– Change the number of rings of the voice

mail service so that the answering

system can answer the call first. To do

so, contact your service provider/

telephone company.

Caller’s recording time

ou can change the maximum message

recording time allowed for each caller. The

default setting is “3 min”.

1 MMENUN (right soft key) #305

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

Selecting “G

reeting only”

You can select “Greeting only” which sets

the unit to announce a greeting message to

callers but not record messages.

Select “Greeting only” in step 2 on

“Caller’s recording time”, page 56.

Note:

R When you select “Greeting only”:

– If you do not record your own message,

the unit will play the pre-recorded

For assistance, please visit http://www.panasonic.com/help

Answering System for Landline

PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 56 2014/01/09 11:59:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-PRL262 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info