298425
23
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
Useful Telephone Settings
23
Handset settings
Memo alarm
An alarm will sound for 3 minutes at the set
time once or daily. 3 different alarms can be
set. A text memo can also be displayed.
Set the date and time beforehand (page 11).
1 Press $ (centre of joystick).
2 Select t, then press ,.
3 Select Memo Alarm, then press
,.
4 Push the joystick up or down repeatedly
to select an alarm (1 to 3), then press
,.
L Times and memos for previously set
alarms will be displayed.
5 Select an alarm mode, then press ,.
Off: Turns the alarm off. Press ,,
then press {ih} to finish.
Once: The alarm will sound once at
the set time. Enter the desired day and
month by selecting 2 digits for each.
Daily: An alarm will sound daily at
the set time.
6 Enter the desired hour and minute by
selecting 2 digits for each.
7 Press / repeatedly to select AM,
PM, or 24-hour time entry, then press
,.
8 Enter a text memo (32 characters max.,
page 49) and/or press ,.
9 Select the ringer that will sound at the set
time, then press , 2 times.
10 Press {ih}.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm
will not sound until the call has ended.
L The alarm will sound at the set time even
when the ringer is turned off.
L If you select Once, the setting will be
changed to Off after the alarm sounds.
Ringer options
Ringer volume
1 Press $ (centre of joystick).
2 Select t, then press ,.
3 Select Ringer Option, then press
,.
4 Select Ringer Volume, then press
,.
5 Push the joystick up or down repeatedly
to select the desired volume.
6 Press ,.
7 Press {ih}.
Note:
L When the ringer volume is set to off, ~ is
displayed.
L When the ringer volume is set to off, the
handset will ring at the lowest volume for
intercom calls and when paged.
Vibration feature
If the vibration feature is turned on, the
handset will vibrate whenever a call is
received, the unit is paged, or when an
alarm sounds.
On: The handset will vibrate while ringing.
VibRing: The handset will vibrate 4
times, then ring.
Off: Turns this feature off.
1 Press $ (centre of joystick).
2 Select t, then press ,.
3 Select Ringer Option, then press
,.
4 Select Vibration, then press ,.
5 Select the desired setting, then press
,.
L 9 is displayed while the vibration
feature is turned on.
KX-TCD560-580NZ(e).book Page 23 Tuesday, July 6, 2004 10:49 AM
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic kx-tcd560 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info