Bedienungsanleitung Panasonic KX-TG273SK (Seite 53 von 88) (Englisch)

588633

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Answering system settings

Number of rings before the unit

answers a call

You can change the number of times the

phone rings “Ring count” before the unit

answers calls. You can select 2 to 7 rings, or

“Toll saver”.

The default setting is “4 rings”.

“Toll saver”: The unit’s answering system

answers at the end of the 2nd ring when new

messages have been recorded, or at the end

of the 5th ring when there are no new

messages. If you call your phone from outside

to listen to new messages (page 51), you

know that there are no new messages when

the phone rings for the 3rd time. You can then

hang up without being charged for the call.

1 MMENUN#211

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

For voice mail service subscribers

If you subscribe to a flat-rate service package

that includes Caller ID, call waiting, voice mail,

and unlimited local/regional/long distance

calls, please note the following:

R To use the voice mail service provided by

your service provider/telephone company

rather than the unit’s answering system,

turn off the answering system (page 49).

R To use this unit’s answering system rather

than the voice mail service provided by

your service provider/

telephone company, please contact your

service provider/telephone company to

deactivate your voice mail service.

If your service provider/telephone company

cannot do this:

– Set this unit’s “Ring count” setting so

that this unit’s answering system

answers calls before the voice mail

service of your service provider/

telephone company does. It is necessary

to check the number of rings required to

activate the voice mail service provided

by your service provider/telephone

company before changing this setting.

– Change the number of rings of the voice

mail service so that the answering

system can answer the call first. To do

so, contact your service provider/

telephone company.

Caller’s recording time

You can change the maximum message

recording time allowed for each caller. The

default setting is “3 min”.

1 MMENUN#305

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

Selecting “Greeting only”

You can select “Greeting only” which sets

the unit to announce a greeting message to

callers but not record messages.

Select “Greeting only” in step 2 on

“Caller’s recording time”, page 53.

Note:

R When you select “Greeting only”:

– If you do not record your own message,

the unit will play the pre-recorded

greeting-only message asking callers to

call again later.

– If you use your own message, record the

greeting-only message asking callers to

call again later (page 50).

Message alert

You can select whether or not the message

indicator on the handset flashes slowly when

new messages are recorded. The default

setting is “On”.

Important:

R If you stored the voice mail access number

(page 55), the message indicator also

flashes for newly recorded voice mail

messages from the landline (page 56).

1 MMENUN#340

2 MbN: Select the desired setting. a

MSAVEN a MOFFN

For assistance, please visit http://www.panasonic.com/help

Answering System for Landline

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG273SK Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info