Bedienungsanleitung Panasonic KX-TG4773 (Seite 38 von 56) (Englisch)

588432

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Intercom

ntercom calls can be made:

– between the base unit and a handset

– between handsets

Note:

R When paging unit(s), the paged unit(s) beeps

for 1 minute.

R If you receive an outside call while talking on the

intercom, you hear 2 tones.

– To answer the call with the base unit, place

the corded handset on the cradle, then lift it

again. If the speakerphone is used, press

MSP-PHONEN 2 times.

– To answer the call with the handset, press

MOFFN, then press M

Making an intercom call

Base unit

1 P

ress MINTERCOMN.

When 2 or more handsets are registered:

– To page a specific handset, enter the

handset number.

– To page all handsets, press 0 or wait for a

few seconds.

R Lift the corded handset if needed.

R To stop paging, press MINTERCOMN.

2 When you finish talking, press MINTERCOMN

or place the corded handset on the cradle.

Handset

1 MM

ENUN a MINTN

2 MbN: Select the desired unit. a MSELECTN

R To stop paging, press MOFFN.

3 When you finish talking, press MOFFN.

Answering an intercom call

Base unit

1 L

ift the corded handset or press MINTERCOMN

to answer the page.

2 When you finish talking, place the corded

handset on the cradle or press MINTERCOMN.

Handset

1 P

ress M

to answer the page.

2 When you finish talking, press MOFFN.

Handset locator

ou can locate a misplaced handset by paging it.

1 Base unit: Press MLOCATORN.

R All registered handsets beep for 1 minute.

2 To stop paging:

Base unit:

Press MLOCATORN.

Handset:

Press M

then press MOFFN.

Transferring calls,

onference calls

Outside calls can be transferred or a conference

call with an outside party can be made:

– between the base unit and a handset

– between 2 handsets

Base unit

1 D

uring an outside call, press MINTERCOMN.

When 2 or more handsets are registered:

– To page a specific handset, enter the

handset number.

– To page all handsets, press 0 or wait for a

few seconds.

2 Wait for the paged party to answer.

R If paged party does not answer, press

MINTERCOMN to return to the outside call.

3 To complete the transfer:

Place the corded handset on the cradle.

R The outside call is being routed to the

handset.

To establish a conference call:

Press MCONFN.

R To leave the conference, place the corded

handset on the cradle. The other 2 parties

can continue the conversation.

R To put the outside call on hold, press

MHOLDN. To resume the conference, press

MCONFN.

Handset

1 D

uring an outside call, press MINTN to put the

call on hold.

2 MbN: Select the desired unit. a MSELECTN

3 Wait for the paged party to answer.

R If the paged party does not answer, press

to return to the outside call.

For assistance, please visit http://www.panasonic.com/help

Intercom/Locator

TG477x(en-en)_1130_ver021.pdf 38 2011/11/30 15:57:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG4773 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info