588622
38
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
Intercom
Intercom calls can be made:
between the base unit and a handset
between handsets
Note:
RIf you receive an outside call while talking on the
intercom, you hear 2 tones.
To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
MN 2 times.
To answer the call with the handset, press
MOFFN, then press MN.
RWhen paging unit(s), the paged unit(s) beeps
for 1 minute.
Making an intercom call
Base unit
1Press MINTERCOMN.
When 2 or more handsets are registered:
To page a specific handset, enter the
handset number.
To page all handsets, press 0 or wait for a
few seconds.
RLift the corded handset if needed.
RTo stop paging, press MINTERCOMN.
2When you finish talking, press MINTERCOMN
or place the corded handset on the cradle.
Handset
1MMENUN a MINTN
2MbN: Select the desired unit. a MSELECTN
RTo stop paging, press MOFFN.
3When you finish talking, press MOFFN.
Answering an intercom call
Base unit
1Lift the corded handset or press MINTERCOMN
to answer the page.
2When you finish talking, place the corded
handset on the cradle or press MINTERCOMN.
Handset
1Press MN to answer the page.
2When you finish talking, press MOFFN.
Handset locator
You can locate a misplaced handset by paging it.
1Base unit: Press MLOCATORN.
RAll registered handsets beep for 1 minute.
2To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press MN, then press MOFFN.
Transferring calls,
conference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
between the base unit and a handset
between 2 handsets
Base unit
1During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
To page a specific handset, enter the
handset number.
To page all handsets, press 0 or wait for a
few seconds.
2Wait for the paged party to answer.
RIf paged party does not answer, press
MINTERCOMN to return to the outside call.
3To complete the transfer:
Place the corded handset on the cradle.
RThe outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
RTo leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
RTo put the outside call on hold, press
MHOLDN. To resume the conference, press
MCONFN.
Handset
1During an outside call, press MINTN to put the
call on hold.
2MbN: Select the desired unit. a MSELECTN
3Wait for the paged party to answer.
RIf the paged party does not answer, press
MN to return to the outside call.
38 For assistance, please visit http://www.panasonic.com/help
Intercom/Locator
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-TG6671 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info