R When the unit is turned on, the
indicator and indicator light
amber for about 2 seconds.
2 Confirm that the
indicator and
indicator light green. (The unit
is ready for use.)
R If the indicators do not light green,
re-position the unit in a place
where the indicators light green.
Note:
R The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected
to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
R The unit can support a maximum of 3
handsets at a time.
Setting the repeater mode
This repeater is pre-registered to the
base unit and the default setting of
repeater mode is “On”. You do not need
to change this setting for initial use.
1 MMENUN #138
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R After turning the repeater mode on or
off,
is displayed on the handset
momentarily. This is normal and the
handset can be used once is
displayed.
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support
the weight of the unit.
