Bedienungsanleitung Panasonic KX-TG7732 (Seite 19 von 88) (Englisch)

588625

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Link to cell settings

Selecting which unit receives

cellular calls

You can select which unit rings and receives

calls for a cellular line. When “All” is

selected, all handsets and the base unit ring.

1 MMENUN

2 For CELL 1: #6271

For CELL 2: #6272

3 MbN: Select the desired handset or “All”.

4 MSAVEN a MOFFN

Note:

R When you select a specific handset to

receive calls for a cellular line:

– other handsets cannot answer the calls.

– the base unit can answer the calls even

though it does not ring. However, you

can make the base unit ring by adjusting

the base unit ringer volume (page 35).

(KX-TG7741 series: page 3)

R When you change the setting to “All”, the

base unit ringer volume also returns to the

lowest level even if the ringer volume has

been changed.

Ring as cell mode

Once this feature is turned on, the handset

and base unit ring using the same ringer tone

as your cellular phone.

The following settings are available:

– “Off”: Turn this feature off to use the

ringer tones of the handset and base unit.

Caller information is announced depending

on the Talking Caller ID setting (page 37).

– “On (with Talking CID)”

(default): The handset and base unit use

your cellular phone’s ringer tone. Caller

information is announced even if the

Talking Caller ID is turned off.

– “On (without Talking CID)”: The

handset and base unit use your cellular

phone’s ringer tone. Caller information is

not announced even if the Talking Caller ID

is turned on.

Important:

R To use this feature, your cellular phone

must support Bluetooth in-band ringtone.

Refer to your cellular phone’s operating

instructions.

1 MMENUN

2 For CELL 1: #6141

For CELL 2: #6142

3 MbN: Select the desired setting.

4 MSAVEN a MOFFN

Note:

R The units use the preset ringer tones

(page 37) instead of your cellular phone’s

ringer tone when a cellular call is being

received if:

– your cellular phone is in silent mode

(depending on your cellular phone).

– the base unit is in use.

– 2 handsets are sharing a landline call.

R If your cellular phone is in silent mode with

“On (with Talking CID)” set, the unit

announces caller information even when

Talking Caller ID is turned off (page 37).

To use the handset ringer tone

instead of your cellular phone’s

ringer tone

Select “Off” in step 3, “Ring as cell mode”,

page 19.

To change the handset ringer tone for a

cellular line, see page 35.

Auto connection to the cellular

phone

After registration, your cellular phone is

connected to the base unit. If you move the

cellular phone out of base unit range, the

cellular phone is disconnected from the base

unit. This feature allows the base unit to try to

reconnect the cellular phone at regular

intervals when it returns within base unit

range. You can set the interval. The default

setting is “1 min”.

For assistance, please visit http://www.panasonic.com/help

Link to Cell

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG7732 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info