Bedienungsanleitung Panasonic KX-TG7842 (Seite 19 von 96) (Englisch)

588636

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

intervals when it returns within base unit

ange. You can set the interval. The default

setting is “1 min”.

Important:

R When you are using a cellular line or a

Bluetooth headset, the base unit loses its

connection from other Bluetooth devices

(cellular phone or headset). To

automatically resume the connection to

cellular phones, leave the auto connection

on.

R Some cellular phones lose connection after

usage, please check the specifications of

your cellular phone for more details.

Handset

1 MM

ENUN#632

2 MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

R Some cellular phones may ask you if you

accept the connection requirement from the

base unit. In that case, select “Off” in step

2. Check the specifications of your cellular

phone.

Connecting/disconnecting the

ellular phone manually

If you will not be using the paired cellular

phone’s link to cell feature temporarily (for

example, you do not want the unit to ring

when your cellular line receives a call), you

can disconnect your cellular phone from the

base unit. If you want to use it again,

reconnect the cellular phone to the base unit.

Note:

R Even if a paired cellular phone was

disconnected from the base unit, if it is

brought within the base unit’s range during

the auto connection interval, it may

automatically connect to the base unit

(page 18).

R A disconnected cellular phone is not

“Unpair” from the base unit, so pairing it

to the base unit again is unnecessary.

Handset

1 T

o connect/disconnect:

For CELL 1: MMENUN#6251

For CELL 2: MMENUN#6252

R A long beep sounds.

2 MOFFN

Cellular line only mode (If you do

ot use the landline)

If you do not use the landline, we recommend

setting the unit to the cellular line only mode.

Important:

R If you turn on the “Cell line only

mode”, disconnect the telephone line cord

from the base unit. Otherwise the “Cell

line only mode” cannot be activated.

Handset

1 MM

ENUN#157

2 To turn on:

MbN: “On” a MSELECTN a

MbN: “Yes” a MSELECTN

To turn off:

MbN: “Off” a MSELECTN

Note:

R Once you set this mode, you can use the

following buttons to make cellular calls:

– for the handset, press M

N or MZN

instead of MCELLN (page 21).

– for the base unit, press MZN instead of

the line button (MCELL 1N or MCELL 2N)

set for the cellular line selection

(page 20, 28).

R Once you set this mode, the following

features cannot be used:

– Landline features (page 43)

– Answering system (page 56)

Messages cannot be received.

– Voice mail features (page 63)

R After this mode is turned on or off, the base

unit reboots.

– Bluetooth connections from cellular

phones or headset are disconnected. If

the auto connection is turned on

(page 18), the cellular phones are

reconnected.

For assistance, please visit http://www.panasonic.com/help

Link to Cell

TG78xx(en)_1210_ver101.pdf 19 2012/12/10 21:19:26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG7842 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info