Bedienungsanleitung Panasonic KX-TG7843 (Seite 25 von 96) (Englisch)

588637

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

2 MbN:

Select the desired cellular phone. a

MSELECTN

R The call is transferred to the handset.

Using the other line during a

onversation

You can handle a cellular call and a landline

call at the same time. When another call is

being received during a conversation, the

interrupt tone sounds (page 39), and the 2nd

caller’s information is displayed if you

subscribe to Caller ID (page 48). You can

answer the 2nd call while holding the 1st call.

Making/answering a cellular call

during a conversation on the landline

1 Press MMENUN during a landline call.

2 MbN: “Hold” a MSELECTN

3 To make a 2nd call:

Dial the phone number. a MCELLN

MbN: Select the desired cellular phone. a

MSELECTN

*1 The unit starts dialing when:

– only 1 cellular phone is paired.

– a specific line is set to make

cellular calls (page 20).

To answer a 2nd call:

MCELLN

R To hold the 2nd call: MMENUN a MbN:

“Hold” a MSELECTN

4 To hang up the 2nd call and return to the

1st call (landline call), press MOFFN, then

press M N.

Making/answering a landline call

uring a conversation on a cellular line

1 Press MMENUN during a cellular call.

2 MbN: “Hold” a MSELECTN

3 To make a 2nd call:

Dial the phone number. a M

o answer a 2nd call:

R T

o hold the 2nd call: MMENUN a MbN:

“Hold” a MSELECTN

4 T

o hang up the 2nd call and return to the

1st call (cellular call), press MOFFN, then

press MCELLN.

Power back-up operation

or landline

When a power failure occurs, the charged

handset temporarily supplies power to the

base unit (power back-up mode). This allows

you to make and receive landline calls using a

handset during a power failure. The base unit

will not perform any other functions. However,

some functions such as Caller ID and shared

phonebook are available only when using a

handset other than the handset supplying

power to the base unit. You can program

“Power failure” and the default setting is

“Auto” (page 41).

Important:

R If a handset is not placed on the base unit

when a power failure occurs, “Base no

power Press OFF” is displayed. After

pressing MOFFN on the handset, place it on

the base unit to start power back-up mode.

R Power back-up mode will not work if the

battery level of the power supplying

handset is

or .

R D

o not lift the power supplying handset

from the base unit during power back-up

mode.

R Do not touch the handset’s charge contacts

during power back-up mode.

R If the battery level is low, the unit will not

work sufficiently during power back-up

mode. In addition, in case handset battery

power runs out, we recommend connecting

a corded-type telephone (without AC

adaptor) to the same telephone line or to

the same telephone line jack using a

Panasonic T-adaptor (page 4).

For assistance, please visit http://www.panasonic.com/help

Making/Answering Calls Using the Handset

TG78xx(en)_1210_ver101.pdf 25 2012/12/10 21:19:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG7843 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info