Bedienungsanleitung Panasonic KX-TG7871 (Seite 52 von 96) (Englisch)

588641

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Copying phonebook from a

ellular phone (phonebook

transfer)

You can copy phonebook entries from the

paired cellular phones or other cellular phones

(not paired) to the unit’s shared phonebook. A

cellular phone must be compatible with

Bluetooth wireless technology.

Important:

R If a copied entry has 2 or more phone

numbers, each phone number (6 max.) is

stored as a separate entry with the same

name.

R If a phonebook entry includes additional

data such as a picture, that entry may fail to

copy to the base unit.

R If your cellular phone includes international

call entries, set the conversion codes

before copying (page 52).

1 Handset:

MMENUN#618

2 Handset:

To copy from paired cellular phones:

MbN: Select the desired cellular phone. a

MSELECTN

R Copied items are stored to the group

(“Cell 1” or “Cell 2”) which the

cellular phone is paired to.

To copy from other cellular phones

(not paired):

MbN: “Other cell” a MSELECTN a

MbN: Select the group you want to copy to.

a MSELECTN

3 When “Use the cell to

transfer phone book” is displayed:

Go to step 4.

When “Select mode” menu is

displayed:

MbN: Select “Auto” or “Manual”. a

MSELECTN

“Auto”: Download all entries from the

cellular phone automatically. Go to step 5.

“Manual”: Copy entries you selected.

R “Select mode” menu is displayed

only when the cellular phone supports

PBAP (Phone Book Access Profile) for

luetooth connection.

4 Cellular phone:

Follow the instructions of your cellular

phone to copy phonebook entries.

R For other cellular phones (not paired),

you need to search for and select the

base unit. The base unit PIN (default:

“0000”) may be required.

R The entries being copied are displayed

on the handset.

5 Handset:

Wait until “Completed” is displayed.

R You can continue copying other entries

if necessary.

6 Handset: MOFFN

Note:

R Some copied entries may have characters

which do not exist in the character table

(page 32). These characters can be

displayed but cannot be entered when

editing an entry.

R The unit does not support some characters.

If a copied entry includes those characters,

they are replaced with other available

characters or “H”.

R If you receive a call while copying

phonebook entries, the copying procedure

stops. Try again after finishing the call.

Setting conversion codes

You must first set the following 3 dialing codes

in the base unit which you want to copy to

before transferring the phonebook from your

cellular phone (each 4 digits max.).

– “International”: An international prefix

used when you make an international call.

– “Country code”: Your country code for

international calls.

– “National access”: A trunk prefix; the

initial digit(s) to be dialed in a domestic call,

prior to the area code.

Base unit

1 MM

ENUN

2 To store “International”: #117

To store “Country code”: #118

For assistance, please visit http://www.panasonic.com/help

Using Bluetooth Devices

TG78xx(en)_1210_ver101.pdf 52 2012/12/10 21:19:29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG7871 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info