Bedienungsanleitung Panasonic KX-TG7875 (Seite 18 von 96) (Englisch)

588645

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Link to cell settings

Selecting which unit receives

ellular calls

You can select which unit rings and receives

calls for a cellular line. When “All” is

selected, all handsets and the base unit ring.

Handset

1 F

or CELL 1: MMENUN#6271

For CELL 2: MMENUN#6272

2 MbN: Select the desired handset or “All”.

a MSAVEN

3 MOFFN

Note:

R When you select a specific handset to

receive calls for a cellular line:

– other handsets cannot answer the calls.

– the base unit can answer the calls even

though it does not ring. However, you

can make the base unit ring by adjusting

the base unit ringer volume (page 38).

R When you change the setting to “All”, the

base unit ringer volume also returns to the

lowest level even if the ringer volume has

been changed.

R The units selected with this setting have the

text message alert feature (page 53)

applied to them. (KX-TG7871 series:

page 3)

Ring as cell mode

nce this feature is turned on, the handset

and base unit ring using the same ringer tone

as your cellular phone.

The following settings are available:

– “Off”: Turn this feature off to use the

ringer tones of the handset and base unit.

Caller information is announced depending

on the Talking Caller ID setting (page 40).

– “On (with Talking CID)” (default):

The handset and base unit use your cellular

phone’s ringer tone. Caller information is

announced even if the Talking Caller ID is

turned off.

– “O

n (without Talking CID)”: The

handset and base unit use your cellular

phone’s ringer tone. Caller information is

not announced even if the Talking Caller ID

is turned on.

Important:

R To use this feature, your cellular phone

must support Bluetooth in-band ringtone.

Refer to your cellular phone’s operating

instructions.

Handset

1 F

or CELL 1: MMENUN#6141

For CELL 2: MMENUN#6142

2 MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

R The units use the preset ringer tones

(page 39) instead of your cellular phone’s

ringer tone when a cellular call is being

received if:

– your cellular phone is in silent mode

(depending on your cellular phone).

– the base unit is in use.

– 2 handsets are sharing a landline call.

R If your cellular phone is in silent mode with

“On (with Talking CID)” set, the unit

announces caller information even when

Talking Caller ID is turned off (page 40).

To use the handset ringer tone

nstead of your cellular phone’s

ringer tone

Select “Off” in step 2, “Ring as cell mode”,

page 18.

To change the handset ringer tone for a

cellular line, see page 38.

Auto connection to the cellular

hone

After pairing, your cellular phone is connected

to the base unit. If you move the cellular

phone out of base unit range, the cellular

phone is disconnected from the base unit.

This feature allows the base unit to try to

reconnect the cellular phone at regular

For assistance, please visit http://www.panasonic.com/help

Link to Cell

TG78xx(en)_1210_ver101.pdf 18 2012/12/10 21:19:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG7875 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info