Sub-menu 1 Sub-menu 2 Settings Code
Base Unit PIN
*1
– <0000> #132 32
Repeater Mode
*1
– 1: On 0: <Off> #138 33
Register Register H.set
– #130 32
Cancel Register
*2
– #131 32
Power Failure
– 1: <Auto> 0: Off #152 19
Language Display
<English> #110 14
Main menu: “Top Key Setup”
Operation Code
Customising the smart function key. #278 15
Main menu: “Caller Barred”
*1
Operation Code
Storing/Viewing bar call numbers. #217 30
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3
You can set the wallpaper to display with or without date and time by pressing
. The
default setting is with date and time displayed.
*4 You can set the handset display backlight while on charge.
– “On”: Backlight is on (dimmed).
– “Off”: Backlight turns off after 10 seconds of charging.
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2010 Copyrights Vision
Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*8 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
28
Programming
