Bedienungsanleitung Panasonic KX-TG9382 (Seite 24 von 72) (Englisch)

588650

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Phonebook

For assistance, please visit http://www.panasonic.com/help

Editing entries

Find the desired entry (page 23). i {MENU}

2 {V}/{^}: “Edit” i {SELECT}

3 Edit the name if necessary (16 characters

max.; page 22). i {OK}

4 Edit the phone number if necessary (24 digits

max.). i {OK}

5 {V}/{^}: Select the desired group (page 22).

i {SELECT} 2 times

6 Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■} (EXIT)

Erasing entries

Erasing an entry

1 Find the desired entry (page 23). i {MENU}

2 {V}/{^}: “Erase” i {SELECT}

3 {V}/{^}: “Yes” i {SELECT}

4 Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■} (EXIT)

Erasing all entries

1 Proceed with the operation for your unit.

Handset: {MENU} i {# }{2}{8}{0}

Base unit: {C}

2 {MENU}

3 {V}/{^}: “Erase all” i {SELECT}

4 {V}/{^}: “Yes” i {SELECT}

5 {V}/{^}: “Yes” i {SELECT}

6 Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■} (EXIT)

Chain dial

This feature allows you to dial phone numbers in

the phonebook while you are on a call. This feature

can be used, for example, to dial a calling card

access number or bank account PIN that you have

stored in the phonebook, without having to dial

manually.

1 Proceed with the operation for your unit.

During an outside call:

Handset: {MENU} i

{V}/{^}: “Phonebook” i {SELECT}

Base unit: {C}

2 {V}/{^}: Select the desired entry.

3 Press {CALL} to dial the number.

Note:

L When a Bluetooth headset is registered to the

base unit (page 48), {W} is displayed instead of

{C} on the base unit’s left soft key in step 1. To

enter the chain dial feature on the base unit:

During an outside call, press {MENU}. i

{V}/{^}: “Phonebook” i {SELECT}

L When storing a calling card access number and

your PIN in the phonebook as one phonebook

entry, press { PAUSE} to add pauses after the

number and PIN as necessary (page 18).

L If you have rotary/pulse service, you need to

press {*} before pressing {MENU} on the

handset or {C} on the base unit in step 1 to

change the dialing mode temporarily to tone.

When adding entries to the phonebook, we

recommend adding {*} to the beginning of

phone numbers you wish to chain dial (page 22).

Copying phonebook entries

You can copy phonebook entries from the base

unit to a handset, and vice versa.

The unit can receive entries until the phonebook

memory is full (page 22).

Important:

L Groups (including their names and ringer tones)

are not copied.

L You cannot make phonebook copy between

handsets directly. However it is possible by first

copying a handset’s phonebook entries to the

base unit, then copying the base unit’s

phonebook entries to another handset.

Y Handset / [ Base unit

TG938x(e).book Page 24 Friday, July 3, 2009 10:10 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG9382 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info