Bedienungsanleitung Panasonic KX-TG9385 (Seite 16 von 56) (Englisch)

689693

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Making/Answering Calls

Making calls

Using the handset Y

Lift the handset and dial the phone number.

L To correct a digit, press {CLEAR}.

2 {C}

L An available line is automatically selected

and the line number is displayed. To change

the line selection mode, see page 14.

L You can also select the line manually by

pressing {LINE 1} or {LINE 2}.

3 When you finish talking, press {OFF} or place

the handset on the base unit or charger.

Note:

L The LINE1 indicator or LINE2 indicator on the

base unit lights up while using the handset.

Using the speakerphone

1 During a conversation, press {s} to turn on

the speakerphone.

L Speak alternately with the other party.

2 When you finish talking, press {OFF}.

Note:

L For best performance, use the speakerphone in

a quiet environment.

L To switch to the receiver, press {C}.

Using the base unit [

Dial the phone number.

L To correct a digit, press {CLEAR}.

2 {SP-PHONE}

L An available line is automatically selected

and either the LINE1 indicator or LINE2

indicator lights up. To change the line

selection mode, see page 14.

L You can also select the line manually by

pressing {LINE 1} or {LINE 2}.

3 When the other party answers, speak into the

MIC.

L Speak alternately with the other party.

4 When you finish talking, press {SP-PHONE}.

Note:

L For best performance, use the speakerphone in

a quiet environment.

L While on a call, you can switch from the base

unit to the handset:

– Press {LINE 1} or {LINE 2} on the handset to

select the line that is being used by the base

unit, then press {SP-PHONE} on the base

unit.

– If the handset is on the base unit, lift the

handset then press {LINE 1} or {LINE 2} on

the handset within 3 seconds to select the line

that is being used by the base unit.

Adjusting the receiver or speaker

volume

Press {^} or {V} repeatedly while talking.

Making a call using the redial list

The last 10 phone numbers dialed are stored in the

redial list in each unit (each 48 digits max.).

1 {REDIAL}

2 {V}/{^}: Select the desired phone number.

3 Proceed with the operation for your unit.

Handset: {C}

Base unit: {SP-PHONE}

Erasing a number in the redial list

1 {REDIAL}

2 {V}/{^}: Select the desired phone number.

i {ERASE} (soft key)

3 {V}/{^}: “Yes” i {SELECT}

4 Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■} (EXIT)

Pause (for PBX/long distance service

users)

A pause is sometimes required when making calls

using a PBX or long distance service. When

storing a calling card access number and/or PIN in

the phonebook, a pause is also needed (page 22).

Example: If you need to dial the line access

number “9” when making outside calls with a PBX:

Y Handset / [ Base unit

TG9385BX(e).book Page 16 Monday, November 2, 2009 1:26 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG9385 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info