Bedienungsanleitung Panasonic KX-TG9385 (Seite 38 von 56) (Englisch)

689693

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Answering System

other line, perform “Editing the number

before calling back”, page 38.

Editing the number before calling back

1 Press {MENU} during playback.

2 {V}/{^}: “Edit & Call” i {SELECT}

3 Edit the number. i {C}

Note:

L The unit automatically uses the line you set in

line selection mode (page 14) to call back. When

the line selection mode is set to “Auto”, the

indicated line (c or d) is used for the call. If

the indicated line is already being used or you

want to select the other line, press {CALL}, then

press {LINE 1} or {LINE 2}.

Erasing all messages

Erasing all messages for both line 1 and line 2

1 {MENU} i {#}{3}{2}{5}

2 {V}/{^}: “Yes” i {SELECT} i {OFF}

Erasing all messages for the desired line(s)

1 {MENU} i {V}/{^}: “Answering device”

i {SELECT}

2 Press {8} repeatedly to select the desired

line(s).

3 {V}/{^}: “Erase all” i {SELECT}

4 {V}/{^}: “Yes” i {SELECT} i {OFF}

Remote operation

Using a touch-tone phone, you can call your phone

number from outside and access the unit to listen

to messages or change answering system

settings. The unit’s voice guidance prompts you to

press certain dial keys to perform different

operations.

Remote access code

A 3-digit remote access code must be entered

when operating the answering system remotely.

This code prevents unauthorized parties from

listening to your messages remotely. The default

setting is “111”.

Program this setting using either one of the

handsets or the base unit.

1 {MENU} i {#}{3}{0}{6}

2 Enter the desired 3-digit remote access code.

i {SAVE}

3 Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■} (EXIT)

Using the answering system

remotely

Dial your phone number from a touch-tone

phone.

2 After the greeting message starts, enter your

remote access code.

L The unit announces the number of new

messages.

3 Follow the voice guidance prompts as

necessary or control the unit using remote

commands (page 39).

4 When finished, hang up.

Note:

L You can also leave a message just as any

outside caller can. After the greeting message

starts, press {*} to skip the greeting message

and record your message after the beep.

Voice guidance

During remote operation, the unit’s voice guidance

starts and prompts you to press {1} to perform a

specific operation, or press {2} to listen to more

available operations. Operations are presented by

voice guidance in the following order:

– Play back all messages

– Play back new messages

– Record your message

– Erase all messages

– Record your greeting message

Note:

L If you do not press any dial keys within 10

seconds after a voice guidance prompt, the unit

disconnects your call.

Y Handset / [ Base unit

TG9385BX(e).book Page 38 Monday, November 2, 2009 1:26 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG9385 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info