Bedienungsanleitung Panasonic KX-TG9472 (Seite 42 von 64) (Englisch)

588654

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Intercom

ntercom calls can be made:

– between the base unit and a handset

– between handsets

Note:

R If you receive an outside call while talking on the

intercom, you hear an interrupt tone (page 28).

– To answer the call with the base unit, place

the corded handset on the cradle, then lift it

again. If the speakerphone is used, press

2 times. You can also answer the call by

pressing MLINE 1N or MLINE 2N after hanging

up the intercom.

– To answer the call with the handset, press

MOFFN, then press M

R W

hen paging unit(s), the paged unit(s) beeps

for 1 minute.

Making an intercom call

Base unit

1 P

ress MINTERCOMN.

When 2 or more handsets are registered:

– To page a specific handset, enter the

handset number.

– To page all handsets, press 0 or wait for a

few seconds.

R Lift the corded handset if needed.

R To stop paging, press MINTERCOMN.

2 When you finish talking, press MINTERCOMN

or place the corded handset on the cradle.

Handset

1 P

ress MINTERCOMN.

2 To page the base unit, press 0.

To page another handset, enter its extension

number.

R To stop paging, press MOFFN.

3 When you finish talking, press MOFFN.

Answering an intercom call

Base unit

1 L

ift the corded handset or press MINTERCOMN

to answer the page.

2 When you finish talking, place the corded

handset on the cradle or press MINTERCOMN.

Handset

1 P

ress M

to answer the page.

2 When you finish talking, press MOFFN.

Note for base unit and handset:

R The ringer volume for intercom calls follows the

higher volume level of the 2 lines (page 27).

Handset locator

You can locate a misplaced handset by paging it.

1 Base unit: Press MLOCATORN.

R All registered handsets beep for 1 minute.

2 To stop paging:

Base unit: Press MLOCATORN.

Handset: Press M N, then press MOFFN.

Transferring calls

Outside calls can be transferred between 2 people.

Base unit

1 D

uring an outside call, press MINTERCOMN.

When 2 or more handsets are registered:

– To page a specific handset, enter the

handset number.

– To page all handsets, press 0 or wait for a

few seconds.

2 Wait for the paged party to answer.

R If paged party does not answer, press the

flashing MLINE 1N or MLINE 2N to return to

the outside call.

3 Place the corded handset on the cradle.

R The outside call is being routed to the

handset.

Handset

1 D

uring an outside call, press MINTERCOMN to

put the call on hold.

2 To page the base unit, press 0.

To page another handset, enter its extension

number.

3 Wait for the paged party to answer.

R If the paged party does not answer, press

MLINE 1N or MLINE 2N that is flashing on the

handset to return to the outside call.

For assistance, please visit http://www.panasonic.com/help

Intercom/Locator

TG9471(e)_1101_ver101.pdf 42 2012/11/01 9:55:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TG9472 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info