Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
1 MMENUN#105
2 MbN: Select the desired setting. a MOKN
a MOFFN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 MMENUN#256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 41.
3 MbN: Select the handsets to be restricted.
a MSELECTN
R “
” is displayed next to the selected
handset numbers.
R To cancel the selected handsets:
MbN: Select the handset. a Press
MSELECTN again. “
” disappears.
4 MOKN
5 MbN: Select a memory location. a MOKN
6 Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MOFFN
Enhancing security for phone
calls
Available for:
KX-TGC420 series (page 3)
You can increase the security of phone
conversations by setting this feature to
“Enhanced”. When “Enhanced” is selected,
is displayed. The default setting is
“Normal”.
1 MMENUN#729
2 MbN: Selected the desired setting. a
MOKN a MOFFN
Note:
R If you set repeater mode to “On”
(page 29):
– Security is set to “Normal” and
is
displayed.
– “Security” is not displayed in the
display menu (page 25).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 41.
1 MMENUN#132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
MOKN
4 MbN: “Yes” a MOKN a MOFFN
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 MMENUN#138
2 MbN: Select the desired setting. a MOKN
a MOFFN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
29
Programming
