Bedienungsanleitung Panasonic KX-TGH260 (Seite 18 von 88) (Englisch)

588773

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Bluetooth devices are disconnected from the

ase unit. This feature allows the base unit to

try to reconnect the Bluetooth devices at

regular intervals when it returns within base

unit range. You can set the interval. The

default setting is “1 min”.

Important:

R When 3 Bluetooth devices (2 cellular

phones and 1 headset) are paired to the

base unit, only 2 Bluetooth devices can be

used with the unit at the same time, and the

base unit loses its connection from other

Bluetooth devices. To automatically resume

the connection to Bluetooth devices, leave

the auto connection on.

R Some cellular phones lose connection after

usage, please check the specifications of

your cellular phone for more details.

1 MMENUN (right soft key) #632

2 MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

R Some cellular phones may ask you if you

accept the connection requirement from the

base unit. In that case, select “Off” in step

2. Check the specifications of your cellular

phone.

Connecting/disconnecting the

ellular phone manually

If you will not be using the paired cellular

phone’s link to cell feature temporarily (for

example, you do not want the unit to ring

when your cellular line receives a call), you

can disconnect your cellular phone from the

base unit. If you want to use it again,

reconnect the cellular phone to the base unit.

Note:

R Even if a paired cellular phone was

disconnected from the base unit, if it is

brought within the base unit’s range during

the auto connection interval, it may

automatically connect to the base unit

(page 17).

R A disconnected cellular phone is not

unpaired from the base unit, so pairing it to

the base unit again is unnecessary.

1 T

o connect/disconnect:

For CELL 1: MMENUN (right soft key)

#6251

For CELL 2: MMENUN (right soft key)

#6252

R A long beep sounds.

2 MOFFN

Cellular line only mode (If you do

ot use the landline)

If you do not use the landline, we recommend

setting the unit to the cellular line only mode.

Important:

R If you turn on the “Cell line only

mode”, disconnect the telephone line cord

from the base unit. Otherwise the “Cell

line only mode” cannot be activated.

1 MMENUN (right soft key) #157

2 To turn on:

MbN: “On” a MSELECTN a

MbN: “Yes” a MSELECTN

To turn off:

MbN: “Off” a MSELECTN

Note:

R Once you set this mode, you can use the

following buttons to make cellular calls for

the handset, press M

or MZN instead of

MCELLN (page 20).

R Once you set this mode, the following

features cannot be used:

– Landline features (page 38)

– Answering system (page 51)

Messages cannot be received.

– Voice mail features (page 58)

R After this mode is turned on or off, the base

unit reboots.

– Bluetooth connections from cellular

phones or headset are disconnected. If

the auto connection is turned on

(page 17), the cellular phones are

reconnected.

–

will be displayed on the handset

omentarily. The handset can be used

once

is displayed.

For assistance, please visit http://www.panasonic.com/help

Link to Cell

TGH26x(en)_1217_ver051.pdf 18TGH26x(en)_1217_ver051.pdf 18 2013/12/17 18:31:482013/12/17 18:31:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TGH260 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info