Bedienungsanleitung Panasonic KX-TGJ422E (Seite 22 von 60) (Englisch)

734786

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Automated call block

Automated call block means the unit screens

incoming calls before ringing. If the call is

allowed, the unit will ring. If the call is identified

as an automated/telemarketing call, the unit

will not ring.

The unit will play a greeting message to the

caller and prompt them to enter an access

code.

This enables the unit to identify whether the

call is automated. You can set the unit to block

or unblock mode. The default setting is

“Unblock”.

Note:

RThe unit connects the call without

prompting to enter access code in the

following situations:

– the caller’s phone number matches an

entry in the phonebook (page 25).

– the caller’s name matches an entry in

the allow name list (page 23).

– the caller’s phone number is memorised

in the allowed number database

(page 22).

RIf the number is stored in the call block list

(page 20), the unit disconnects the call

without playing the greeting message for

automated call block.

RThe automated call block feature is not

available during power failure (page 12).

RWhen the answering system answers a call

from a caller who is not registered in the

phonebook, allow name list or allowed

number database, the following operations

are delayed:

– answering a call

– remote turn on

– toll saver

RWhen the unit receives a call from a caller

who is not registered in the phonebook,

allow name list or allowed number

database in the following situations, the unit

shifts to standby mode:

– when searching the phonebook, caller

list, redial list, call block list, or allow

name list

– when programming (depending on

settings)

– when using the answering system

– when paging all handsets or the base

unit

RBlocked calls are logged in the caller list.

We recommend that you check the caller

list periodically. If necessary, register the

entry to the phonebook or allow name list to

connect the call next time.

Allowed number database

Once the caller enters the access code, the

caller’s phone number is memorised in the

allowed number database as an unblocked

number. Callers from this database are

allowed to connect without the access code

from their next call.

100 entries can be stored to the database (22

digits max. each).

Note:

RWhen the database memory is full, the

latest call received will replace the oldest

number stored in the list.

RThe numbers stored in the database will be

erased when you change the access code

(page 22).

RThe numbers stored in the database cannot

be displayed.

Setting the automated call block

1MCALL BLOCKN a MOKN

2MbN: “Block/Unblock” a MOKN

3MbN: Select the desired setting. a MOKN

4MbN: “Yes” a MOKN a MOFFN

Note:

RWe recommend you perform a test run of

the automated call block procedure to

ensure that the automated call block

feature is set correctly.

Changing the access code

If the unit answers undesirable calls such as

automated calls even though the automated

call block function is on, change the access

code (3 digits max.). The default setting is “1”.

1MCALL BLOCKN a MOKN

2MbN: “Access Code” a MOKN

22 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Automated call block

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-TGJ422E Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info